SOURCE: replacing oil pan on 2003 dodge neon
To replace the oil pan jack and place car in towers. Remove the undercover shielding and watch out for the exhaust that will also have to be move. Drain the oil pan. The holding bolts will be removed with appropriated tools. Tap with wood block to lose it. Once removed check the oil pump for damage. To replace make sure to used a proper gasket and sealant. Install all parts back.
SOURCE: Transmission toque specs
The spec is 12 ft lbs of torque. Use a an even pattern when you tighten the bolts, this assures the gasket will not be damaged and create another leak.
SOURCE: I need the torque spec for camshafts / 98 Dodge Neon 2.0 dohc
Here is the factory torque chart for all fasteners on the 2.0L
TORQUE CHART 2.0L DOHC
DESCRIPTION
TORQUE
Camshaft Sensor Pick-Up
Bolts
9.6 N·m (85 in. lbs.)
Camshaft Sprocket
Bolt
115 N·m (85 ft. lbs.)
Connecting Rod Cap
Bolts
27 N·m (20 ft. lbs.) Plus 1/4 Turn
Collar - Oil Pan to Transaxle
Step 1: Collar to Oil Pan Bolts
3 N·m (30 in. lbs.)
Step 2: Collar to Transaxle Bolts
108 N·m (80 ft. lbs.)
Step 3: Collar to Oil Pan Bolts
54 N·m (40 ft. lbs.)
Crankshaft Main Bearing Cap/Bedplate
M8 Bedplate Bolts
30 N·m (22 ft. lbs.)
M11 Main Cap Bolts
81 N·m (60 ft. lbs.)
Crankshaft Damper
Bolt
142 N·m (105 ft. lbs.)
Cylinder Head
Bolts
Refer To Cylinder Head Installation
Cylinder Head Cover
Bolts
12 N·m (105 in. lbs.)
Drive Plate to Crankshaft
Bolts
95 N·m (70 ft. lbs.)
Engine Mount Bracket
Bolts
61 N·m (45 ft. lbs.)
Exhaust Manifold to Cylinder Head
Bolts
23 N·m (200 in. lbs.)
Exhaust Manifold Heat Shield
Bolts
15 N·m (130 in. lbs.)
Intake Manifold
Bolts
28 N·m (250 in. lbs.)
Oil Filter Adapter
Fastener
80 N·m (60 ft. lbs.)
Oil Filter
20 N·m (15 ft. lbs.)
Oil Pan
Bolts
12 N·m (105 in. lbs.)
Drain Plug
34 N·m (25 ft. lbs.)
Oil Pump Attaching
Bolts
28 N·m (250 in. lbs.)
Oil Pump Cover Fastener
12 N·m (105 in. lbs.)
Oil Pump Pick-up Tube Bolt
28 N·m (250 in. lbs.)
Oil Pump Relief Valve Cap
55 N·m (40 ft. lbs.)
Spark Plugs
Plug
28 N·m (20 ft. lbs.)
Thermostat Housing
Bolts
23 N·m (200 in lbs.)
Timing Belt Tensioner Assembly - Mechanical
Bolts
28 N·m (250 in. lbs.)
Timing Belt Tensioner Assembly - Hydraulic
Bolts
31 N·m (275 in. lbs.)
Timing Belt T
SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC
I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]
SOURCE: intake manifold torque specs for 2002 Neon SXT
SOHC ENGINE INTAKE MANIFOLD TORQUE IS 105 INCH POUNDS
1,018 views
Usually answered in minutes!
×