At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Double check to make sure the abs harness from the new wheel bearing is plugged in. If it is unplug it and make sure the pins in the other connector are not bent. To very common problems that are quick to check out.
If you service engine soon light is on you have a problem and the problem needs to be fixed. This light is turned on when the on board diagnostics see a problem and set a code. this code will point you in a direction to solve your problem. So you need to have some one scan your vehicle for codes
The ABS module when active makes noise when it is trying to control the vehicle by applying "leave" and "press" mechanism. If the lights are coming on , it is possible that the ABS needs to be fixed. Take it to the authorized service centre to electornically diagnose and reset the codes.
it should come on at intial start up and immediately go off, its' in self check mode... if it is staying on longer than it should then have it scanned with a abs scan tool at you dealer or trusted independant repair shop, please rate my help, thanks...
i serviced my 2004 yukon for abs light came on they told me it was the right front abs speed sensor wire , which is sold sepratly or with wheel hub cost$ 300 or 57$ for just sensor wire, i did all brakes changed sensor and for awhile the stayed off but comes on and at about 20 mph it turns off ?
check under vehicle on frame rail drivers side, should see abs assembly, disconnect red wire buzzing will stop, will have to replace assembly, will not have abs braking, will have base brakes, if red brake light comes on do not drive vehicle, have towed to repair shop
×