There are so many OBD 2 but they are not support for Camry 2003, please help!!
SOURCE: OBD code 0401 (1997 Toyota Camry 4 cyl)
There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty. It takes some pretty detailed troubleshooting to confirm this in some cases, so if that's not in your line of work, you may have to have it properly diagnosed, or take a 50/50 shot at which one first.
SOURCE: HOW TO CHANGE BRAKE LIGHT BULB ON A 2005 TOYOTA
Take cover off back at the trunk and it will pop out push in light twist off and put new one in
SOURCE: how to erase toyota camry code obd 1
Hello, and welcome to FIxYa.
To erase the check engine light on a 1994 Camry, open the hood, and, in the engine compartment fuse box, remove the blue 15 amp EFI fuse for one minute. This will clear the codes. If you have a hard code; ie a malfunctioning sensor, the light will come right back on.
Thanks for choosing FixYa for assistance.
SOURCE: where is the OBD connector on a 2003 toyota highla...
It is located on the bottom of the Driver's side dash, below and to the left of the steering wheel. The connector is recessed about an inch and has a black cover that has "OBDII" imprinted on it.
SOURCE: Replace a burned-out bulb or headlight on a 2003 Toyota Camry XLE
I have similar issue with my 03 Camry XLE. I replaced the left side headlight bulb and the light still not coming on. Thanks in advance for the help.
253 views
Usually answered in minutes!
×