2007 Honda Ridgeline Logo
Anonymous
Anonymous Posted on Dec 13, 2008
Answered

RESET OIL GAGE ON CHEVROLET VENTURE

HOW TO PUT THE OL GAVE BACK TO 100 AFTER AN OIL CHANGE ON A 2001 CHEVY VENGTURE

Answer This Question

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Feb 25, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Feb 25, 2009
Answers
2
Questions
0
Helped
2379
Points
2

On the dash next to the odometer is a plastic pin sticking out. By pushing this pin you can set your trip odometer A, B or reset the Oil back to 100 percent. To Reset any of these values turn the key on or to accessory and push this pin in on whichever value you are trying to reset and hold it in until the computer reset the value to 100 percent on the oil or to zero on the trip odometer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert 93 Answers
  • Posted on Dec 13, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

Joined: Dec 09, 2008
Answers
93
Questions
1
Helped
77231
Points
377

Get in turn the key to acces. II Don't start the engine. And press the gas pedal down 3 time within 5 second. If that dosn't work turn the key off and try agen.

If that dosnt work try pressing it down 5 times withtin 10 seconds.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

1998 chevy venture running hot change the water pump and the thermostat, the fan is working, the temp gage goes up in the cool area then drops down to the hot area, what can the problem be?
Make sure the thermostat was the right temp range. Had same problem on ford truck and parts store gave me a 160 when it should have been a 180 degree thermostat.
Read full answer
Feb 17, 2014 • 1998 Chevrolet Venture Cargo
1helpful
2answers

I change the oil keep saying need oil change
on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor. the message center should reset and go off. turn key off and then start car. to see if reset.sometimes you have to go slow 3 times to floor with gas pedal.MAKE SURE ENGINE IS NOT RUNNING WHEN YOU DO THE RESET.
Read full answer
Aug 17, 2010 • 2001 Chevrolet Venture
2helpful
2answers

Reset oil change light 2000 chevy venture
Try turning the key to the on position without starting the vehicle and press your gas pedal all the way to the floor 3 times within 10 seconds of turning the key to the on postion. If this doesn't work let me know and I'll have another solution.
Read full answer
Apr 20, 2010 • 2000 Chevrolet Venture
4helpful
2answers

Uplander oil service idecator rest" 2007 model year
Not a problem. Comes on based on miles, so you should also change the oil. But you need to manually reset the counter.

Chevrolet Uplander, 2005-06 Chevrolet Venture 2001-05
With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center (DIG).
Once “OIL” is displayed, push and hold the trip/reset button for five seconds.
The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset.
Repeat the procedure.

Read full answer
Jan 02, 2010 • 2007 Chevrolet Equinox LS New Cars
0helpful
1answer

How do i reset change engine oil light on a 2000 chevy venture
1. With the ignition key in RUN but the engine off, fully push and release the accelerator pedal slowly three times within five seconds.

2. Turn the key to off.

IF the CHANGE ENGINE OIL light comes back on, the engine life monitor has not reset. Repeat the procedure.

I have noticed personally that I have press my accelerator 5 times. Each vehicle has it's own idiocyncracies
Read full answer
Sep 26, 2009 • 2000 Chevrolet Venture
1helpful
1answer

How do i reset change engine oil 2000 model chevrolet venture
. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center. 2. When OIL is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining). 3. Turn the key to OFF. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure
Read full answer
Jul 11, 2009 • 2000 Chevrolet Venture
1helpful
1answer

The oil was changed in the 01 chevy now the light won't reset?
did you turn key to on position and depress throttle 3 times
Read full answer
Jun 14, 2009 • 2001 Chevrolet Silverado 1500
0helpful
1answer

I have a 2005 Venture and have not been able to reset the change engine oil light. After repeatedly pressing the trip/reset button for 2 minutes the message center was still flashing change engine oil and...
Notes ENGINE OIL LIFE SYSTEM

HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system.

  1. With the ignition key in "RUN" but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center (DIC).
  2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  3. Turn the key to "OFF". If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
If this does not work you may have a problem with your instrument cluster.
Read full answer
Mar 22, 2009 • 2005 Chevrolet Venture
0helpful
1answer

Reset mesage
press trip button till oil reads in the dash (it is a count down) once there press and hold button down till it resets.
Read full answer
Aug 24, 2008 • 2003 Chevrolet Venture Passanger
0helpful
3answers

Oil Gauge
How do I reset my oil gauge after an oil change?
Read full answer
Jul 08, 2008 • 2007 Honda Ridgeline
Not finding what you are looking for?

View Most Popular

2007 Ridgeline

  • Cars & Trucks

Related Question

1998 chevy venture running hot change the water pump and the thermostat, the fan is working, the temp gage goes up in the cool area then drops down to the hot area, what can the problem be?

  • 1998 Chevrolet Venture Cargo

Related Topics

253 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need radio code for my 2006 honda ridgeline.

2006 Honda Ridgeline

My 2009 Honda Ridgeline won't

2006 Honda Ridgeline

What fuse controls the tail lights? all other lights are working except both tail lights .

2007 Honda Ridgeline

Honda Ridgeline rear seat leg problem

2007 Honda Ridgeline

How to remove the rear

2008 Honda Ridgeline

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...