At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Connector for Speed Sensor on1996 Honda Accord Auto Trans.
I need to replace the connector for the speed sensor on my 1996 Honda Accord EX 4Cyl. VTEC w/ Auto Trans. Will the connector from a wiring harness for a non-VTEC engine work?
can you buy a new connectorcan you buy a new connector
AnonymousMar 16, 2014
Im swapping a 1995 honda accord vtec engine in a 1997 honda accord lx i need the ecu wiring schematic for the vtec solenoid, egr lift sensor, vtec pressure switch,Im swapping a 1995 honda accord vtec engine in a 1997 honda accord lx i need the ecu wiring schematic for the vtec solenoid, egr lift sensor, vtec pressure switch,
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look behind the engine, almost directly under the engine air intake unit, to locate the vehicle speed sensor. Locate the sensor's 12 mm hex bolt. The bolt is slightly further back and towards the driver's side of the car, relative to the vehicle speed sensor connector.Jan 9, 2023
This car is known for bad Instrument Clusters. Not to say that it is out of the question that your speed sensor could be bad... But 75% of the time it is the Cluster in the 1996-1997 Accord.. Car Part com Used Auto Parts Market
It is not the speed sensor at issue then, it is the wiring, try replacing the connector to the speed sensor, a common fault. Solder and shrink tube the repair connector to the harness. The dealer can supply a new connector, about $20.00
For 1997 Honda Accord 2.2L MFI
4cyl the Vehicle Speed Sensor - Location is located mounted on transmission. OPERATION The Vehicle Speed Sensor
(VSS) is a magnetic pick-up sensor that sends a signal to the
Powertrain Control Module (PCM) and the speedometer. The sensor measures
the rotation of the output shaft on the transaxle and sends an AC
voltage signal to the PCM that determines the corresponding vehicle
speed.
TESTING
Disconnect the negative battery cable.
Disengage the wiring harness connector from the VSS.
Using a Digital Volt-Ohmmeter (DVOM), measure the resistance
(ohmmeter function) between the sensor terminals. If the resistance is
190-250 ohms, the sensor is okay.
REMOVAL & INSTALLATION
Disconnect the negative battery cable.
Disconnect the three terminal connector from the vehicle speed
sensor (VSS).
Remove the fasteners that secure the VSS to the transaxle housing
assembly.
Remove the VSS.
To install:
Install the VSS.
Install the mounting bolts.
Connect the three terminal connector to the sensor.
it's only a couple of things that could be wrong. if you already replaced to speed sensor make sure you have power and the connector. but it's prob you gauge
Hi...
The SPEED Sensor on your Honda accord 94.
is located on the Transmission.
About Under the Thermostat housing ( if you follow the lower radiator hose from radiator to engine) you will found the thermostat housing.
Under the thermostat housing you will see on the trans, the sensor is the only one on this side of the trans,
I hope this help on your problem.
Thank you for use fixya...
can you buy a new connector
Im swapping a 1995 honda accord vtec engine in a 1997 honda accord lx i need the ecu wiring schematic for the vtec solenoid, egr lift sensor, vtec pressure switch,
×