Driver side front window motor
SOURCE: i have a 1995 impala
First thing I'd check is the optispark sub harness. Check both connections, the one by the optispark and the one on the passenger side of the intake manifold. Disconnect both sides and check for corrosion. This is a known weak spot on these motors.
If that checks out your going to want to start with the basics. Do you have spark and fuel? Pull the spark plug wire for a cylinder and using a spark tester test for spark while cranking. You want to have a nice blue spark. If you have good spark check for fuel pressure by hooking up a fuel pressure gauge to the shrader valve on the fuel rail. It should be in the high 40s - low 50s. If you have fuel also, check to make sure the injectors are getting a pulse using a noid light.
SOURCE: how do i install electric fans in a 96 impala ss?
I am not the most mechanical guy and i did it with out much problem. You can get the fans at alot of car parts houses. i just layed under neith the front bumper and there were only a couple of screws and a connector to plug back in.
SOURCE: driver side window off track
2 sets (total 4) T30 Torx screws need to be removed.
The 2 holding the interior door handle grip / cup.
And then behind where the cup is, there are 2 more, that secure the door panel to the door.
FWIW, there are also 2 philips screws. One at the top, near the mirror. The second at the moveable door handle latch.
Lastly, of course, the standard "pop" sort of fasteners, around the perimeter on the 2 sides and bottom of the door panel. Also, there are 2 light blue plastic alignment posts (that do *not* fasten).
When re-assembling, make *sure* to properly catch / engage the door panel's top black plastic lip into the 3 hidden metal "U" holders, at the very top of the door panel.
SOURCE: replace window motor 96 chevy cavalier
take out the door padding
unscrew the glass from the panel
take the glass support kit out
remove the motor and replace it.
NOTE : MAKE SURE THE WIRE DOESNT TRIP OFF THE PULLY.
SOURCE: Code P1441 on 96 Chevy impala Ss comes On :/ how
do you smell gas? evap canister. check vacuum lines from evap or purge valve. do not reverse lines. or it could be nothing use obd 2 tool and clear code and see if it comes back..
652 views
Usually answered in minutes!
×