2012 Chevrolet Cruze LS Sedan 1.8L 4-cyl. 6-speed Manual Logo

Related Topics:

A
Anonymous Posted on Aug 02, 2012

Can't remove head rest

I need to remove head rests in order to install seat covers.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on May 13, 2009

SOURCE: cannot get adjustable head rest off the seat

On the plastic pieces surrounding the insertion hole on top of the seat back,there is a very very tiny hole on the side of this piece of plastic. You need to insert a rigid piece of wire or a very fine nail of some kind into this small hole and push until you feel it give, then pull up on the headrest. it should come out. You have to do this on each of the two insertion holes. It's easier with two people.

Ad

Anonymous

  • 630 Answers
  • Posted on Aug 02, 2010

SOURCE: how do I get the head rests off 2002 monte

push in the adjustment clips while pulling up on the head rests

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Nov 13, 2010

SOURCE: how do you take out

Not much info on vehicle but look at area where headrest goes into seat, for a small spot where you can push in to release and then pull up headrest at same time.

Randy Ohler

  • 14585 Answers
  • Posted on Feb 07, 2011

SOURCE: I need to know how to remove the head rest on the

99% just pull out, the other s have a button on the seat right at the head rest.

Anonymous

  • 213 Answers
  • Posted on Feb 07, 2011

SOURCE: How do I remove the

see a plastic cap type thing attached to the seat where the rod of the headrest goes in feel this cap and you wil find a puch button press it and pul the head rest

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

How do I remove the rear bench seat on a Galant 2010 to install seat covers? Thanks

push back firmly at front of seat at bottomlocating clip released with upward preasure
0helpful
1answer

I want to install a seat cover, but I need to remove the head rest on a 2003 Dodge Neon SXT

most head rest have a lock button to hold and lift the rest off..... or pull up harder my be stuck
2helpful
1answer

We need to remove the drives side head rest to install a seat cover, but we cannot figure out how to remove the head rest. How do you remove the driver's side head rest?

Head Restraints Removal
  1. Unscrew front seat head rest guide rod retainers (610A18) .
  1. Pull up on front seat back head restraint (611A08) . Compress foam in area of front seat head rest guide rod sleeves (610A16) .
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves .
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve .

    Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves .
  1. Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint .

9a4d433.gif
0helpful
1answer

How to remove the head rests on the front seats of a 1998 Lexus LS400 to install seat covers

there is a small push in clip at the bottom of one of the small chrome shafts. you push it in while you pull the head rest up.
0helpful
1answer

Need to remove head rest to put on seat covers

I looked into new headrest for my 2005 Grand Cherokee with the monitors installed in them. I had mine off but couldn't remember how i did it. But I got the instuctions from the the company with the new headrest and they linked me to a video online. The company was on ebay. I remember that it was really simple
0helpful
1answer

How do you remove the headrest on a 1996 ford crown victoria?

Head Restraints Each front seat is equipped with dual-post design front seat back head restraint (611A08). The front seat back head restraint is installed as follows:
  • It travels on dual posts which have notches to engage a spring-loaded catch in the guide.
  • The front seat back spring assembly retains the front seat head rest guide rod sleeve (610A16).
  • The front seat back head restraint is adjustable from its normal position to a raised position of approximately 25 mm (1 inch).
  • Pull up on the front seat back head restraint to raise it. Pushing down will return it to its normal position.
----------------------------------------------------------------------------------------------

Removal
  1. Unscrew front seat head rest guide rod retainers (610A18).
  1. Pull up on front seat back head restraint (611A08). Compress foam in area of front seat head rest guide rod sleeves (610A16).
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves.
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve.

    Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint.
Not finding what you are looking for?

428 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...