Question about 1989 Mercedes-Benz Mercedes Benz 500 Class
Posted by Anonymous on
If your talking about an immobilizer then i would get the red key chain holder to the car it would reset the immobilizer.....or call the dealer sry if i could not fully help you
Posted on Oct 30, 2009
This could be caused by a faulty Crank position sensor. The computers are expensive for this and not something that commonly fails on these. Have the fuel pumpchecked for operation and pressure. Check for spark at the plugs. Then we can procede further if you would like.
Posted on May 22, 2010
SOURCE: I am getting no heat
No. The lack of heat is usually attributed to the heater control valve tearing a diaphragm. They also use an electric waterpump on the passenger near the fender well. These items do need to work in conjunction with one another. Let me guess, heat will trickle in until you hit the gas and then nothing?! Typical of the heater control valve behind the firewall, passenger side, under the hood. Black in color and a 2 pin connector to it. It uses a electromagnetic solenoid which when activated, raises the diaphragm and allows water to pass. When torn, they block the flow. What makes these so easy is, when you remove the 4 slotted head (or flathead) screws in the small square control valve, you lift it up and replace the diaphragm. You loose very little coolant and it only takes minutes. You can find the repair kit online for about $15. Let me know if you need anything else.
Posted on Nov 08, 2010
Tips for a great answer:
Dec 27, 2013 | 1989 Mercedes-Benz Mercedes Benz 500 Class
Aug 27, 2012 | Cars & Trucks
Nov 25, 2010 | 1989 Mercedes-Benz 300-Class
May 22, 2010 | 1990 Mercedes-Benz E-Class
Jan 05, 2010 | 1991 Mercedes-Benz 420
Jan 04, 2010 | 1991 Mercedes-Benz 420
Nov 11, 2009 | 1987 Mercedes-Benz 300-Class
Sep 19, 2009 | 1989 Mercedes-Benz 300-Class
Jun 11, 2017 | 1991 Mercedes-Benz 420
213 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: