1999 Ford Crown Victoria Logo

Related Topics:

Anonymous Posted on Aug 06, 2012

My 95 crown vic was starting fine yesterday....cut off on me today while driving to work an then would not start back up...dosen't seem like its getting gas but there is gas in the car, could my f

  • Anonymous Aug 08, 2012

    i found the problem.....my husband installed a sound system in my ride. when he unhooked my battery is reset my fuel system switch in the trunk..i had to push in the button an the fuel then was able to travel thru the system.

×

1 Answer

Mike

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Aug 06, 2012
Mike
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 06, 2012
Answers
1
Questions
1
Helped
500
Points
3

Definately sounds like the fuel pump

4 Related Answers

Anonymous

  • 62 Answers
  • Posted on Jul 07, 2009

SOURCE: How to reset the fuel pump shut off switch for 95

The shutoff should be somwhere in the trunk area. Behind a panel on the left side most likely. It will be a little black box and have a button on the top, if you push the button you'll hear a click.

Ad

Ray Keckeisen

  • 599 Answers
  • Posted on May 01, 2009

SOURCE: My 99 Crown Vic acts like it isn't getting gas

check for clogged fuel filter first, usually the pump works or it dosen't, check and get back to me.

ltfrc

Mike Schmidt

  • 227 Answers
  • Posted on Jan 17, 2009

SOURCE: 2005 Crown Vic Police Interceptor: Starts then stalls

Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.

Anonymous

  • 1 Answer
  • Posted on Dec 20, 2009

SOURCE: 2000 Crown Vic cranks but won't start.

Check the fuel pump reset switch again, if it is popped back out then replace that little switch in the trunk, any ford one will do. it works off a magnet and a bearing to close the circuit for the fuel pump. easy fix.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

"I have a 95 ford crown vic and the key ignition is stuck in the on position and i tried a new key ignition switch but it didn't work it was still moving freely wat is the problem now"

it sounds like the ignition cylinder has dropped a tumbler not sure of replacement procedure for ur car but it needs the ignition cylinder replaced
0helpful
1answer

Lost 3rd gear and overdrive on my 92 crown vic

I have a 92 Crown Vic first and second works fine reverse works fine when it shifts in the third gear it goes to slipping and overdraft can you help me fix this problem thank you
0helpful
1answer

1988 forn crown vic misfire?

If the cap rotor and plug wires are original, I would look at them first.
Also check the condition of the plugs.
0helpful
1answer

Hi Folks, My 99 crown vic has an intermittent stalling issue. I can be driving along and it just cuts out (usually, not always, when I take my foot off the gas). It will start right up at first and...

Was the fuel pump checked out?
Have a scope put on it,to check for a worn armature. May also be binding up mechanically
Also check TPS Sensor data or scope it
0helpful
1answer

Crown Vic wont turn over.

I would check the plugs around and on the engine. Also check to see if the inertia switch in the trunk was tripped, that cuts off power to the fuel pump in an accident.
0helpful
2answers

How do I change the starter I cant get at the bolts. Do I need to take off the wheel and cowling or can you get at them from under the car

chilton makes a great bible for theise problems go to chapters indago and have a look at the book it will explain how to remove the thing with pics
4helpful
3answers

2000 Crown Vic cranks but won't start.

Check the fuel pump reset switch again, if it is popped back out then replace that little switch in the trunk, any ford one will do. it works off a magnet and a bearing to close the circuit for the fuel pump. easy fix.
0helpful
1answer

Coolant link for manifold/95

Yes the manifold is plastic and you need to repair quickly or you will have alot of water in your motor and bye bye motor or car
0helpful
1answer

1992 ford crown victoria keeps cutting off...i replaced the fuel

it's time to check your engine ...it's better done soon
Not finding what you are looking for?

510 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...