SOURCE: Broke one of the mirrored glass tops for 1981 Chevrolet Corvette.
http://www.20thstreetauto.com/specials/spec58.htm here are smoked ones. http://cincinnati.craigslist.org/pts/966430154.html mirrored glass http://cgi.ebay.com/ebaymotors/CORVETTE-78-82-MIRRORED-T-TOPS--TOP--CORVETTE-ROOF_W0QQitemZ330300599122QQcmdZViewItemQQimsxZ20090114?IMSfp=TL090114126005r1464 pairs i will see if i can find 1
SOURCE: 1981 Corvette glass T-Top repair
Sure not a problem! I have a '76 Corvette. I use Mid America Motorworks. You may also want to search Ebay. I have purchased a lot of parts from both places, and have never been dissatisfied.
(I was a little skeptical about Ebay at first, but I dealt with those that have Ebay stores, checked their Seller rating, their Feedback score, and posted questions to them. Always got the part I wanted, and pretty darn fast!)
I bought my carpet set, and various steering components from Mid America Motorworks. They send me a catalog about two to three times a year. They have those T-Top gaskets sets for an '81 Corvette. Your Corvette is a C3 like mine.
SOURCE: 1981 corvette seat conversion
you will need to pull off the four retaining nuts holding seat in place. Measure the length and width of bottom support frames. Many seats are interchangable.
SOURCE: 1981 corvette carb adjustments 4 bblr feadback
the idle adjustment needs to be performed warm but the mixture screws at or near the base have springs on then they need turned in all the way and backed out 2 turns then when the vehicle is warm the idle screw is near the linkage also with a spring on it if you have a tach in the car it should its a corvette lol turn the screw in or out until the car idles around 750 to 850 rpm it idles up automatically when cold if your choke is set properlythis should get you where you need to be you may need to adjust mixture screws a little the only proper way to do this is with a vacuum box but you will be in the ballpark anyway with the method i gave you
100 views
Usually answered in minutes!
×