Question about 2004 Chevrolet Express
Posted by Anonymous on
The actuator is probably way up under the dash and impossible to see until you remove AC pipes or glove box. Check shop manual if possible.
Posted on Jun 18, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You need to replace the handle itself. The inside of the handle where the metal cable fitting attaches causes too much strain on the plastic and the molded groove breaks. Ford has the same problem. I don't know why these car man. dont just go back to all metal exterior handles. If you have time you can probably fix it with epoxy and washers, but the fastest way is to get one aftermarket or from a junkyard. Hope this answers your question.
Please remember to rate this fix.
Posted on Feb 14, 2009
Had the same thing happen to my truck, the blen door actuator is under the console on passenger side, but the heater core is going to be clogged if you dont have any heat coming through, but a/c works..
Posted on Oct 06, 2009
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
Posted on Mar 10, 2010
Tips for a great answer:
Oct 16, 2018 | Cars & Trucks
Jul 23, 2017 | Ford Cars & Trucks
Jan 16, 2016 | Pontiac Cars & Trucks
Dec 26, 2015 | Chevrolet Monte Carlo Cars & Trucks
Dec 03, 2015 | Pontiac Bonneville Cars & Trucks
May 17, 2015 | GMC Cars & Trucks
Nov 04, 2012 | 2001 Chevrolet Silverado
Aug 29, 2010 | 1998 Chevrolet Astro
Nov 13, 2009 | 2001 Ford Windstar
5,794 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: