Installation diagram for a serpentine belt 93 dodge shadow 3.0 V6

well it did not fall off
so pencil and paper draw out yours.
takes 5min work, no service manual to buy.
it depends on what 3 engines is there now.

seen here. (USA only car) exports ive no clue.

Try looking under hood. Sometimes there a sticker showing the route

type your question into google hundred of answers


2007 DODGE Grand Caravan Serpentine Belt Diagram for V6 3 8 Liter Engine...

Which engine ?

Fig. 14: Sprocket timing for belt installation - 3.0L engines (click over pic for zoom)

Hope this helps (remember to rate this answer).

For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)



Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!

Wrong alternater or your putting the belt on wrong.

OK I'M ASSUMING YOU HAVE THE V6, IF SO YOU NEED TO FOLLOW THIS DIAGRAM: 5P023 (Diagram number) -AND THE FOLLOWING LINK WILL TAKE YOU TO A PDF THAT YOU CAN SCROLL DOWN AND FIND THAT DIAGRAM:
http://oskin.ru/pub/chrysler-dodge/manuals/Mopar%20Catalogs/2003_Mopar_Belts_Hoses.pdf

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.