1993 Mazda MX-6 Logo

Related Topics:

Posted on Aug 15, 2012

WHERE IS OBD PORT LOCATED ON THE 1991 MAZDA CAPELLA

CAN THE TOYOTA LEVIN AIRFLOW METER WORK ON 626

5 Related Answers

Anonymous

  • 341 Answers
  • Posted on Dec 10, 2008

SOURCE: obd II location problems...

Front seating area, driver side, under dash, mounted above kick panel clearpixel.gif

Ad

Anonymous

  • 491 Answers
  • Posted on Sep 06, 2009

SOURCE: mazda 626 1991 back brake ligths not working

Is the fuse for the brake lights OK?
Check for power to the brake light switch at the brake pedal and for power coming from it with brake pedal depressed.

Testimonial: "just a bit more information from me to help me more :)"

Anonymous

  • 1985 Answers
  • Posted on Dec 11, 2009

SOURCE: 1992 mazda 626 where is the obd conector located

your connector is under the hood on the passenger inner fender well back by fire wall

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jan 23, 2010

SOURCE: Where is the location of the backup light switch

the switch is on the outside of the case of the transmission, here is a picture of it, has a long wiring harness with four wires.

6005ba3.jpg

Anonymous

  • 1 Answer
  • Posted on May 24, 2010

SOURCE: 2002 Mazda 626 Horn Fuse

Under the hood under a black cover. On the underside of the cover it will tell you which fuses are for what.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is my diagnostics connection located on my 93 mazda mx6 4 cylinder?

For 1993 Mazda MX-6 2.0L MFI DOHC 4cyl the OBD Diagnostic Link Connector is located: Under hood, driver side, upper engine area, passenger side rear of air filter housing, mounted next to airflow meter connector.

Hope this helps (remember to rate this free answer)
.
0helpful
1answer

Where is the fuse box in a 1989 Mazda capella (not the one under the bonnet)?

Hello
I did not give up, the Capella is the same as the 626 in the USA.

The fuse box and fuse box diagram is located in front of the driver side door approximately 8 inches from the floor, under the or near the dash. There is a black cover on the fuse box on the cover is a diagram of the fuse box fuses. Remember this is for a left hand drive as far as the driver position goes.

1helpful
1answer

1992 mazda 626 where is the obd conector located

your connector is under the hood on the passenger inner fender well back by fire wall
0helpful
1answer
0helpful
2answers

Obd II location problems...

Front seating area, driver side, under dash, mounted above kick panel clearpixel.gif
0helpful
1answer

Mazda runs for 5sec then stops

check your fuel pressure regulater..it is located on the left back side of the intake manifold close to the fule rail..
0helpful
2answers

ABS, Traction control and handbrake light is on. Car was running on 3 cylinders previous to the lights coming on. 1999 Mazda SP20 Familia (323)

I have a Mazda Capella (626) 1998 and had similar problem other than it was running on 4 cylinders and the hand brake light was not on and the ANSWER was a speed sensor which is to do with ABS system needed replacing. You can determine which one is broken by putting volt meter over each of them.
0helpful
1answer

91 MAZDA 626

As far as I know yes the software is the same, all that is different is the plug.
Not finding what you are looking for?

177 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...