Checked all fuses, and replaced bulbs. I suspect wiring, but the wiring harness looks OK.
Check whether the connectors on the rear light is not well connected.Also check the wiring whether are having sending power by using a tester as well.
SOURCE: 1991 volvo tail lights
Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?
SOURCE: Tail lights don't work on 1998 Chevy Silverado.
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
SOURCE: I have a 2000 chevy 2500 and the tail lights, tag
First try this,hold the brake pedal down while you push and wiggle the hazard light switch.If the brake lights come on then you need to replace the multi function switch or turn signal switch both are the same thing.If they don't come on then check the brake light switch it could be faulty.
161 views
Usually answered in minutes!
Is there a fuse I should check before I replace the bulb
is there a fuse I should check before I replace the bulb?
×