Cars & Trucks Logo

Related Topics:

Anonymous Posted on Aug 20, 2012

Have a 92 plymounth sundance it no spark nore does it have power to the coil

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 786 Answers
  • Posted on Aug 22, 2012
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Aug 12, 2012
Answers
786
Questions
1
Helped
246010
Points
2462

Could be ignition modual...

5 Related Answers

Anonymous

  • 4669 Answers
  • Posted on Jun 05, 2009

SOURCE: stall as soon as oil light came on..92 sundance

I don't think a 92 sundance will shut the fuel pump down when the oil pressure is low, but it might. Can you get it to run on carb cleaner. If it is oil pressure, the car should start then run a few seconds and die. Have you checked the timing belt? If it broke the distributor will stop turning which would stop the oil pump.

Ad

Anonymous

  • 360 Answers
  • Posted on Oct 24, 2008

SOURCE: 92 Accord 2.2 No spark

the distributors can go bad on these hondas......... check the rotor under the cap it could be melted causing a no spark.......

daves944

Dave C

  • 1050 Answers
  • Posted on Mar 30, 2009

SOURCE: my 92 accord turns but have no spark

You need a new distributor, these are a common problem and available new at just about any auto parts store. There are three inductive pick-up coils, a module and coil inside this thing and they go bad. You could try changing the module first, but they are non returnable, if it doesn't fix it, you're stuck. If it does fix it, chances are, the pickup coils are on their way out soon.
I would just get the whole new unit, about a 100 bucks on Ebay, $185 at the store.

Anonymous

  • 11896 Answers
  • Posted on Sep 23, 2009

SOURCE: No spark on 92 honda accord put on ecm still no

Crankshaft position sensor will need to be replaced.

Anonymous

  • 9 Answers
  • Posted on Oct 29, 2009

SOURCE: No power and no ground power to my coil. There's

Could be the cam position sensor.Happy hunting!!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

92 Plymouth sundance duster 3.0 v6* engine drops battery power and will sometimes die when shifting from second to neutral and coming to a stop!

check voltage to battery with vehicle running it should be 14.25 volts .minimum 13.25volts. if voltage is not enough then voltage regulator ,and, or alternator is bad. make sure belt is not loose.
1helpful
1answer

New spark plugs, new spark plug wires, new distibutor, new distibutor cap, new coil, new coil wire still not getting any spark why?

I know you list a new distributor, but the pick up coil (inside the distributor) is what will trigger the coil for spark. Located under the rotor, it needs to be checked at the harness for voltage (key on) and measure resistance in the PU coil itself using an ohm meter. Check the harness for breaks or damage, there really is nothing else that might cause this unless you have a complete failure in your engine computer (located next to the battery).
0helpful
1answer

New spark plugs and coil why am i not getting a spark?

Do youDo you have battery volts at the coil +ve?
0helpful
1answer

I cant get spark on my 1990 plymouth sundance. I tried replacing the ignition coil, i put a new pick up point and cap too. any thoughts?

Please make sure that the trigger required for the coil to give out the High voltage to spark comes from the pulsating voltage at the coil LT( low tension).
So check for the make /break on the coil- on one side you will need the positive and on the other the trigger. Once this is seen then the distribution can be checked, check the HT wires and contacts in the distributor.
3helpful
1answer

Valve cover gasket

Buy the package that come with valves cover gasket and 4 spark plugs tube seals. Its around $10 - $20 and for replace it only remove the pcv valve tube, the sparks plugs cables and ignition coils. Its so easy!! remove the valves cover, only have 10 screws. Try to buy original Plymounth gaskets or Felpro.
0helpful
1answer

Stall as soon as oil light came on..92 sundance

I don't think a 92 sundance will shut the fuel pump down when the oil pressure is low, but it might. Can you get it to run on carb cleaner. If it is oil pressure, the car should start then run a few seconds and die. Have you checked the timing belt? If it broke the distributor will stop turning which would stop the oil pump.
0helpful
1answer

No power at take off

Check all your vacum lines and make sure that your plug wires are properly secured this seems like a minor problem
0helpful
1answer

92 sundance gas gauge doesnt work

IT SOUNDS LIKE YOU NEED TO REPLACE THE FUEL SENDING UNIT. IT SHOULD BE LOCATED ON THE FUEL PUMP.
Not finding what you are looking for?

158 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...