Lost car codes to stero

get the serial no of the stero and the car, the dealer can get you the code

You will need an OBD II reader.

see here  for the Neon 2001 - 2008 

http://www.torbaycarstereo.co.uk/chrysler_p05091610ab.html

or if not try here

http://www.radio-code.co.uk/code-entry-help-Chrysler.htm

DO NOT buy the car.!!!
Regards,DT

the dealership should give you the code they just need your vin

On my Neon you enter the 4 digit code using the channel preset buttons if your code is say 2435 press channel 2, then channel 4, channel 3 & channel 5 it should then fire up ok.

First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc) 

To see if your code is available here for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .

If not then POST ANOTHER QUESTION


quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING

note: Unfortunately not all radios can be decoded using the Serial Number 

If not then try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive 

Unfortunatly you will have to bring the radio to the chrysler dealer for the code. This is not a guarenteed but when I had to replace my battery in my acura, I had to goto the dealer to get my stero unlocked. They charged me about 50 bucks. Hope this helps.

Hi

You need the serial code of the radio. My question is how do you remove the radio. I take it you are in the UK, (don't think US have the codes)

your local dealer can help you with that