I installed a new coil and also a new distributor,but there is no spark at the ignition coil.
Where does a crank sencer ignition go
Their are two spark control features one is the pick up coil it's mounted under the distributor the other is in the distributor it the control module check the pink wire that plugs into the distributor for power
SOURCE: 1995 chevy astro van not start get gas new spark
Does it have spark? If not, likely the ignition control module.
Hope this helps.
SOURCE: ignition sequence on a 1994 chevy astro van 4.3 v6
Firing order on a six cylinder:
1-6-5-4-3-2
Hope it helps
Mike
SOURCE: 1994 Chevy K1500 engine cranks
The troubleshooting charts for your ignition system are copyrighted and I cannot post them here. You can have access to them by subscribing to alldatadiy.com fo a small fee.
The MOST LIKELY cause of your problem is a failed distributor module. (inside the distributor) The symptoms you described can also be caused by many other things like loose or corroded connectors or even a failed Powertrain Control Module (PCM)
Please also review this article:
What Else Could Be Wrong?
1,501 views
Usually answered in minutes!
no spark at the coil to the distributor
×