I just replaced my gas tank and to do that i had to pull the fuel pump out and put it in the new one. everything is screwed in correctly and the gas gauge works but its not showing the right fuel marking. i just filled it up alllllll the way and its only showing a half tank. what happened?
You will need to replace the fuel tank level sending unit.
SOURCE: Fuel Gauge Flickers but does not work properly-
there is a fuel senor inside of the tank and it could very well be the problem
SOURCE: 2002 honda crv fuel gauge moves really slow.
I had the same problem. My battery was going bad. When I replaced it with a new one, the fuel gauge worked fine.
SOURCE: fuel gauge on 1993 Dodge Dakota V8
Definitely the gauge can be changed, provided the float in the fuel tank is OK, i.e. no leaks. This float connects to a potentiometer which records the current flowing thru it and displays it in the gauge. So before replacing the gauge measure the current and match that against the quantity of fuel in the tank...............sodeep
SOURCE: fuel guage not working correctly
your gauge is part of the integrated unit in the fuel pump module
SOURCE: Gas gauge is not reading correctly. Shows a full
the problem is caused by a defective gas gauge sending unit, this part is located inside the gas tank, you must remove the gas tank to replace it.
389 views
Usually answered in minutes!
×