I have a '93 mazda mx6 4 cylinder. It stalled out at a red light and now it will not start. Replaced the distributor but still not starting. It turns over but won't start. Please help.
SOURCE: Mazda 323 2002 Sting Immobilizer
Fcuk I got same problem with my Mazda 3 year 2004. Noone can help me at all !!! Even in Mazda they have no idea where is problem. For me it is at the moment only in cold weather. I cannot get throught immobilizer. After few turns it works, but not always (only when its bit warmer). I found out that if it is warmer, and I turn on ventilation for a while after it will let me go! Immobilizer starts flashing ... after few more minutes and turning key few times it will let me go !!! Please write me to [email protected] if you will know updates... I am desperate , cannot use my car in winter at all or cold weather. In summer works fine
SOURCE: Mazda mx3 wont start
VSS or vehicle speed sensor aka cam sensor or crank position sensor. Test the battery and alternator. You should also check for blown fuses, bad wires and grounds on a car as old as yours. If you find it's getting spark and fuel after further testing, check the timing belt. It could have slipped or broke even if it was changed recently so either pull off the cover or at least do a compression test.
SOURCE: Is there a diagnostic code "reader" on the Mazda MPV 1993?
I am having a similar problem and my mechanic thinks it's a fuel regulator. Part was ordered and it's being replaced this week. We'll see. Unrelated, I'm/we're having a heck of a time finding an oil pan...mine is very blistered....but it is 17 years old.
SOURCE: 1996 mazda mx3 precidia, extremely hard to start
Before you spend the time and money,get the auto choke checked.It may make the car hard to start.Basics 1st.Hope this helps
SOURCE: 94 mazda 2.0 engine 626 won't start.
Have you checked the fuel pressure? It sounds like a bad fuel pump.
118 views
Usually answered in minutes!
×