Need complete wiring diagram for the spark plugs. Have 2 wires that have come off the back of the engine and not sure which cable fits where. Posts are 1, 2, 3, 4 in vertical position and currently the 1 & 3 cables are still attached. Not sure which one goes to which post.
SOURCE: i'm trying to install a
a radio install kit will have a diagram with it, plus the connectors you get with the kit should have writing on the wires to tell you what they are, the radio wires will have the same writing
SOURCE: Installation (wire diagram) for remote starter on a 2001 Pontiac Sunfire
try going to diy rattler.com
SOURCE: 97 pontiac sunfire 2.2 liter serpentine routing diagram needed
this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone
SOURCE: need a 2004 pontiac grand am spark plug firing order diagram
2004 Pontiac Grand AM
2.2 liter DOHC L4 VIN "F"
2004 Pontiac Grand AM
3.4 liter V-6 VIN "E"
SOURCE: firing order 89 pontiac bonneville
For the 1989 Pontiac Bonneville 3.8L V6:
Firing Order:
1-6-5-4-3-2
Cylinders:
.......(back)
2.........4.........6
1.........3.........5
.......(front)
Ignition Connections:
(back)
___
o <---6
o <---3
___
o <---2
o <---5
___
o <---4
o <---1
(front)
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
GM Cavalier/Sunfire 1995-2000 Repair Guide
Print
See Figures 1 and 2
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.
Fig. Fig. 1: 2.2L (VIN 4) Engine Firing Order: 1-3-4-2 Distributorless Ignition System
814 views
Usually answered in minutes!
×