Hi i have power to the horn fuse and all is connected but the horn don,t work.yes the horns do work they have been tested.
SOURCE: Mazda 626 electrical problem
hello do you have a tow bar and trailer plug .if so check that first.get back if you dont .we can go from there
SOURCE: I try to jump start
hi norwegian
im dave
thats weird
try removing the horn relay first and disabling your alarm if so equipped
is your car manual or automatic?
SOURCE: 2002 Mazda Protege horn location
Their are usually in back of grille or on the underside of rails. you will need to take off the front bumper to get access.
SOURCE: rx7 horn problem
Did u check both fuse panel one under the hood the other in the cab under or on the side of the dash. Also sometimes the switch inside the stearing wheel will short or just stop working due to dust or excessive force. If the car has a drivers air bag it will be costly to replac this switch due to the explosives used in the air bag deployment system. good luck and good hunting
406 views
Usually answered in minutes!
Add ahttp://www.autozone.com/autozone/repairinfo/componentlocations/componentLocationMain.jsp?fromSearchPage=true&categoryNValue=4294747004&categoryName=Horn+Relay Here's where the horn relay is located. Comment
http://www.autozone.com/autozone/repairi...
http://www.autozone.com/autozone/repairi... Here's what it looks like and the other link is where it's at and the first link is ,i don't know,hope this helps.
http://www.autozone.com/autozone/parts/D... Here's a picture and price of horn relay,think I sent you two of the same on location,sorry.
Thanks Thomas that has helped lots,now the only two relays that i can find in the engine bay are not for the horn,so where would it be ????
Hi Gavin,here's the horn location.Front seating area, driver side, under dash, above kick panel, in relay block, mounted on upper panel .
http://www.autozone.com/autozone/parts/D... Here's what it looks like,sorry about the other link,hope this works,
Thank you very much.I have been looking in the wrong spot,I thought that it would be in the engine bay.Once again thanks for your help.
×