Question about 1999 Jeep Wrangler

Open Question

Where is the neutral safety switch in a 99 wrangler with standard transmission

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 46 Answers

SOURCE: neutral safety switch

It is on the left side of the tansmission just above the transmission oil pan.

Posted on Aug 29, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: '99 Wrangler idles funny

im no expert but check idle control valve

Posted on Oct 24, 2008

Anonymous

  • 114 Answers

SOURCE: Where is the neutral safety switch in a 2002 Jeep

should be part of the prndl switch which is on the trans just behind where the linkage is fastened

Posted on Mar 08, 2009

Anonymous

  • 1 Answer

SOURCE: 2004 Jeep Grand Chrokee Neutral Safety Switch Location

The switch is on the transmission..It is usually a dealer item but you can get one from Rockauto.com for about 1/4 of what the dealers charge.

Posted on May 25, 2009

canbruce75

Bruce Canfield

  • 1776 Answers

SOURCE: neutral safety switch

I would recommend going to the autozone.com website and registering the vehicle. It doesn't cost anything and will give you access to an online repair manual for the vehicle. The steps for replacing the neutral safety switch can be found there. (I checked). Hope this helped and best wishes.

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The engine went dead when I slow down to turn on neutral gear. what is the possible cause?


Neutral gear? Standard transmission or Automatic? If automatic
car may be smart enough to shut down. If Standard transmission
you may have a clutch safety start switch wire loose or bad switch.

Feb 27, 2015 | Cars & Trucks

2 Answers

Symptoms for a faulty neutral safety switch


No start (engine doesn't crank with starter motor) in neutral and park position, one or both

Oct 16, 2012 | Cars & Trucks

1 Answer

Jeep wrangler 2.5 standerd turns over has fuel but no spark checked all relays and crank sensor computer is shuting down asd relay as soon as key is on. what does pcm look for when asd relay is not...


Is it an automatic transmission?
Have you try to start the Wrangler in Neutral.
On automatic transmission there is a neural safety switch.
When it's not send the correct gate position signal (P R N D... ) to the ECU not energize import relay like ASD.
Check for loose linkage to the transmission. + lube linkage with white Lithium grease spray.
Check for loose wiring to the neutral safety switch.

Aug 11, 2011 | 1997 Jeep Wrangler

1 Answer

MY 99 SATURN ONLY STARTS IN NEUTRAL. IT GOES INTO PARK BYT STAYS IN REVERSE. I CAN ONLY START IN NEUTRAL!!!


THERE IS A NEUTRAL SAFETY SWITCH ON THE TRANSMISSION. THIS SWITCH NEEDS TO BE REPLACED

Jan 14, 2011 | 1999 Saturn SL

1 Answer

Manual transmission stuck in neutral


two things to start with is the brake light switch? Do the brake light come on when pedal is pushed? No Replace brake light switch. Yes the replace netrual safety switch. Thats a start good luck.

Nov 03, 2010 | 1994 Jeep Wrangler

1 Answer

Neutral safety switch


most gm nuet safety is yellow and purple .....out of ignition switch is a big yellow wire that is crank out and input to nuet saf switch......out of nuet switch is color purple that goes strieght to start selenoid.....purple wire also goes to the crank fuse 5amp.. in the fuse box under dash... this fuse goes to the pcm main computer.. same for auto and clutch

Sep 04, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Where is the neutral safety switch in a 2002 Jeep Wrangler with automatic transmission?


should be part of the prndl switch which is on the trans just behind where the linkage is fastened

Mar 08, 2009 | 2002 Jeep Wrangler

1 Answer

2.5 jeep wangler 1999 wont start .starter checks out ok


Could be a bad connection between the battery and starter. Starter solenoid, or neutral safety switch if it is standard transmission.
Check for power at the solenoid.
Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Jan 26, 2009 | 1999 Jeep Wrangler

1 Answer

Jeep wrangler won't start


Find the neutral sefety switch and 99% chance, you have found the problem. generally on stickshift cars, the switch is above the clutch pedal, not on the transmission.

Dec 26, 2008 | 2008 Jeep Wrangler

Not finding what you are looking for?
1999 Jeep Wrangler Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...