Headlights will not work even after i change the bulbs
SOURCE: How do I change a headlight bulb in a 2003 focus?
Drivers side: Remove plastic cover on rear of headlamp by pushing down on long wire clip.Pull cover outwards and downwards to release the two clips on top of cover.
Remove wiring connection from rear of bulb.
You will now find that a mirror and torch will come in handy.Using the mirror you will see that the bulb is held in place with a spring clip that locates under a metal lug on the headlamp.Push the clip so that it releases from the lug and swing the clip away from the bulb.Remove old bulb.
Insert new bulb making sure the locating tab is in the correct position.[Use the mirror to check].
Replace spring clip.
Reconnect electrics.
Replace rear cover and long wire clip.
Passenger side:Little more difficult.Remove battery cover and follow the same instructions as for the drivers side.Not so much room to work this side though.
Do not touch the glass parts of the bulbs whilst changing them and if you do clean the glass with metholated spirits before fitting.
SOURCE: how to change headlight bulb on ford mondeo
Very easy, 2 or 3 minutes.
Remove radiator grille. 2 plastic fittings on top, quarter turn and lift out grille.
Remove complete headlight. Simply lift out 2 L shape retaining pins. Disconnect lead. Ease out complete headlamp unit.
Remove back of headlamp unit to access bulbs. Disconnect lead from bulb while bulb still held by clip. Then release clip to remove bulb.
Reverse process to fit.
SOURCE: headlight went out in 2003 ford escape i have
you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.
SOURCE: change headlight bulb
I believe if you look in the owner's manual you will see a picture that explains how to pull the headlight out. I removed parts one night to find out later that the two flat metal strips just pull up and the head light can be pulled forward and the bulb can be replaced.
SOURCE: Change headlight bulb for 2006 Ford Focus
common problem,the base gets corroded to the fitting,once the glass has broken,use pliers to twist and pull out.
61 views
Usually answered in minutes!
×