2001 Ford F150 Styleside SuperCrew Logo

Related Topics:

Posted on Nov 13, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2001 F150 The heater stays running

The heater stays running after you shut the truck off. You have to turn the switch to the off position to get it to stop running.Also there is a beeping sound like the seat belt makes when you are driving down the road. This does not do it all the time seems like it goes and comes. Call anyone give me a idea as to what it might be

1 Answer

toddgilbert

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Ford Master 6,360 Answers
  • Posted on Nov 13, 2017
toddgilbert
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Sep 07, 2017
Answers
6360
Questions
5
Helped
1525260
Points
27737

Here's the link and I'm sure you will get the solution of your problem Ford F150 1997 To 2003 Service Repair Manual

5 Related Answers

shaggyrat

Christophe Thompson

  • 1224 Answers
  • Posted on Jun 01, 2008

SOURCE: F150 Problem

this sounds like all the problems are wrapped up in the trucks security module that controls all these devices you will want to take to dealer to get them to check the security module seeing that every module built the same but has different parameters

Ad

NewMerlin

  • 2 Answers
  • Posted on Jul 28, 2008

SOURCE: front seat stays in the reclined postion..

The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Anonymous

  • 1 Answer
  • Posted on Sep 11, 2008

SOURCE: Beeping noise - 2005 Mustang

I have a 2005 Mustang, and sometimes if you have something in the passenger seat (like a bag or purse) the car may think that it's someone sitting there without a seat belt. Other beeping sounds come from your blinker being on too long while driving, your trunk may not be closed all the way, or your door may not be closed all the way, or your over head lights may be on. It's so easy to rub up against the light when you get into the car, and in the daytime you won't know that it's on. Your dash will light up, but it's such a quick flash, you can't tell what it is.

co7196

Ned C Cook

  • 3433 Answers
  • Posted on May 26, 2009

SOURCE: Annoying beeping

had the same problem, It was the driver door latch - door ajar signal

Anonymous

  • 2004 Answers
  • Posted on Aug 22, 2009

SOURCE: driving down the road 2001 F150 went completely

Check thru all the fuses

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 93 Ford F150 4.9 liter. And when I go to start it the fuel pump stays running for close to four minutes and then it will not start until the fuel pump shuts off?

OK, when you turn the key to on, it will start the pump for about 2 seconds-this is just to put pressure in the lines and in the fuel rail for easy starting. If key is not turned to start, pump will shut off after 2 seconds. But when cranking in start, and when engine is running, the pump is on full time.
If your pump runs longer than 2 seconds with key only in on position, you have a fuel circuit problem. It very well could be a bad fuel pump relay staying on. Or it could be a computer problem signaling the relay to stay on longer. Try a new fuel pump relay first and see if that was the problem.
0helpful
1answer

I have a 2003 Ford F-150 FX4 5.4 and the AC only blows out of the defrost and help

Dustin, Sound like vacuum loss to position switch. Defrost is the default position when vacuum is lost in vent control system. Check any and all vacuum lines and connections under hood first, especially any that run through firewall. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2001 F150 V6 4 2 AC Heat Stuck In Defrost Easy Repair

Heating Vent Control Issue Page 2 Ford F150 Forum

2003 150 heater auto climate control Defrost Only Ford F150 Forum

Fixed the EATC defrost only Ford F150 Forum Community of Ford Truck Fans
0helpful
1answer

When I try to start my F150 4.6 W it just turns over. When it first broke-down, the engine started for a second and shout down. I first checked the Fuel Pump Shut-off Switch but I received a good...

factory alarm key chip in key when goes bad will do the same check if theft light stay flashing when key is in on position if theft light stays flashing it alarm problem
0helpful
2answers

Daytime running lights won't shut off on 2001 grand am

check the drl 9daytime running lights0 relay under the hood. I could be stuck in the on position.
1helpful
1answer

Ford f150 heat problem not much heat unless you run fan on low.alls been replaced radiator,heater core,water pump,hoses

possible blend door in the dash is broke . when you turn blower on high it blows the door shut . i have the same issues and i have heard this could be the issue . especially since you said that you replaced everything except the blend door.
0helpful
1answer

SAfter shutting off the truck, radio and fan continue to run. Also, went out the other morning and found radio running without keys in the ignition. I tried replacing the relay switch in the fuse box. ...

Check and make sure the ignition switch is not worn out and allowing you to remove the key when the switch is turned backwards in teh accessory position. once the key is removed and the radio is staying on, turn the ignition without the key in it, both directions and see if it shuts off, if it does, menas work cylinder or key.
0helpful
1answer

2001 ford f-150 it has a 4.6 motor the temp gauge goes all the way to hot when the key is turned on and stays there while running but the motor is not running hot the motor looses power like it is going...

PROBLEM IN THE ENGINE COOLANT TEMPERATURE SENDER UNIT.IF ITS FAULTY BY IT BEING PART OF THE PCM.IT WILL TELL PCM ENGINE RUNNING HOT WHICH WILL SHUT DOWN TO KEEP FROM DOING FURTHER DAMAGE.
3helpful
2answers

Ford 1995 F150 Truck. Turn ignition key off but Truck still runs

ignition switch electrical portoin above brake pedal on steering column

shack
0helpful
2answers

2002 F150 starting issue

sounds like you might have a problem with your ignition switch, it's sticking and acting like your key is in when it's out.
0helpful
1answer

1989 F150 ignition cylinder switch

Remove the ignition switch cylinder and inspect the contacts in the column. Look for dark spots, scratches, excessive scuffing. My guess is that cleaning the contacts with a little tiny piece of sandpaper and perhaps bending them out a little (so there is more pressure between the contacts when you reinstall the cyclinder) will cure the problem.
Not finding what you are looking for?

86 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...