Find shift linkage on 2001 chevy prizm automatic

SOLVED: Toyota highlander shift lever moves freely but - Fixya

https://www.fixya.com > ... > Toyota > Highlander
Sept 2, 2019 - First off, set the parking brake, raise vehicle so you can get under it. Remove the shift linkage from the transmission and manually move the shift lever to ...
I have a 2002 Toyota Echo. The end of the gear - Fixya
Oct 24, 2008
SOLVED: My 2001 toyota highlander will not shift into - Fixya
Sept 1, 2019
Transmission gear shift got stuck in Drive not able to move
Nov 20, 2019
Toyota sequoia gear shift lever broken - Fixya
Nov 16, 2019
More results from www.fixya.com

2001 V6 Highlander - Transmission Cable issue? - Toyota ...

https://www.toyotanation.com > forum > 816897-2001-...
Jun 9, 2014 - The shift lever moves VERY freely, but will not engage or come out ... It's probably a broken shifter cable , the joint at the transmission ...

Car in park shifter will move through gears but wont shif...

https://www.yourmechanic.com > Questions
Jul 13, 2016 · 1 answer
From what you've described, it sounds like the shifter cable came off at the transmission or the shifter. I'd suggest checking the shift ...

Automatic Transmission Problems Shifting Gears - Ira Toyota ...

https://www.toyotaofmanchesternh.com > automatic-tra...
One reason why an automatic transmission isn't shifting into gear has to do with the fluid. If it's not at the right level or the incorrect type has been used, ...

If the truck has an automatic transmission the switch is on the left side of the transmission. It is part of the shift linkage as it goes into the transmission. https://www.justanswer.com/chevy/36wik-change-neutral-safety-switch-2001-silverado.html

A/t it is. 3sp or 4sp not the same. but R is same.
wow, can you drive forward (the other shoe drops)
can you move car in neutral brakes off by pushing it.by hand?
yes, good .
no?, brakes are locked up.
ok, now i pretend you said, car goes forward in Drive.
so next check fuses!
then
level ok , ok, dont guess how, read the book how.
the shift'er moves cable and the other end fits to the side
of the a/t manual valve. so, does this far end move to true reverse.?
the cable is 1 to 1. and must move to Reverse actual. at the transmission, end....
do not get hurt testing parts engine running,.do not. get expert help, not seen here.

if only reverse fails,then transmission needs service.
and the manual valve on side of box is in Reverse detent felt, then the trans is bad.
if all this is confusing (as is normal trans is complex) then get car serviced.?

in shop we make sure levels ok
then shift to reverse see that the box is really in reverse (this is called the reverse stall test failing and step, 2 is line pressure tests,
in drive and reverse and the latter fails.
trans is toast.

replace transmission more likely cable need replacing old shift cable stretched more likely.

manual or automatic? could be a linkage issue but then again hard to tell without more details

sdfsdfdssf

linkage is binding near the shifter base.

check neutral safety switch...usually mounted on gear selector...also check shift linkage for correct adjustment

That does sound like a linkage adjustment problem.

If that does not work, I'd try a fluid change and filter. But your diagnostics with pulling on the gear shifter is a pretty good indication of a linkage problem.

buy a new horn and replace it.