Camshaft sensor located above crankshaft pulley, the camshaft sensor mounted on the front timing cover above the crankshaft pulley.
SOURCE: 2005 gmc yukon xl denali service ride control
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
SOURCE: i need to recharge my ac in a 2002 gmc yukon where
your charge port is under hood on the line going to accumulator.look for black or blue cap with the letter L on it.WARNING BESURE TO WEAR SAFETY GLASSES.
SOURCE: where are the oxygen sensors located?
There will be one located before, and one located after the catalytic converter for each exhaust that you have
SOURCE: where is the camshaft position sensor located on
It is located at the front of the engine under the crankshaft harmonic balance. Real easy to get to and replace.
SOURCE: Where is the pedal sensor for a gmc yukon 2007
P0121 Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance Problem
that is a drive by wire system the gas pedal has a sensor rigt above it make sure the plug is all the way in or the sensor could have a glicth in it and would have to be replaced
1,221 views
Usually answered in minutes!
×