Question about 2002 Mitsubishi Lancer

4 Answers

I have a code p0715, which is the input turbine speed sensor

Where is this sensor located

Posted by on

  • Anonymous Apr 28, 2009

    My GF has the same code but It shouldn't be a turbo issue, since our cars dont have turbo

  • Anonymous May 02, 2009

    has to do with the transmission...loooking for a manual....

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The input/turbine speed sensor has nothing to do with the turbo. It is transmission related and is a circuit malfunction. I am having the same problem and it causes my car to downshift into 3rd gear (computer's fail safe gear) on the highway. The sensor is located above the transmission housing, and doesn't require you to take apart the tranny. I am having trouble finding the part number for this and where to buy it. Any help would be nice.

Posted on Jul 27, 2009

  • 1 more comment 
  • oilydude89 Aug 25, 2011

    any suggestions on what the sensor looks like and where it is to be exact

  • toricrosby
    toricrosby Dec 29, 2012

    im having the same issue on my 02 lancer ES. i got my sensor offline for only $53 including tax. just got it, a week later. trying to locate it to replace it.

  • Justen Henson
    Justen Henson Jul 24, 2014

    Is it hard to change out?

×

Ad
  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Have the same problem with the input speed sensor. The part, so far, is only made by Mitsubishi (Part No. 8651A111) and cost about $110 (w/ tax in TX).

Posted on Oct 07, 2009

×

Ad
toricrosby
  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just ordered my speed sensor offline for $53 including tax and shipping. got it in the mail 5-7 days later. ps- its NOT turbo related..at all.

Posted on Dec 29, 2012

  • Mohtashim Ahmed Jun 16, 2014

    Hi there, where did you buy it from?

×

blueextc3221
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Intake on the turbo header.

Posted on Dec 26, 2008

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

johnjohn2

Johnny Brown

  • 5763 Answers

SOURCE: i have a troble code

this input sensor is located on the left side of the trany,heres a diagram to help you loacte it, good luck and hope this helps.johnjohn2_62.gif

Posted on Feb 09, 2011

Anonymous

  • 162 Answers

SOURCE: how do I locate the turbine speed sensor on a ford

its on the front of the transmission below the coil it compares the input shaft/turbine speed against the speed of the output sensor it is checking to see how much slip or diffrenece in shaft speeds the only time the two shafts are spinning at the same time is when torque converter is in lockup

get this sensor from ford dealer for a little more than $100 bucks

Part number F32Z7F040A

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the camshaft position sensor located in a
The camshaft position sensor is located on top of the engine near the ignition coils.
The camshaft position sensor is located on top of the engine near the ignition coils.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The camshaft position sensor is either located near the top of the engine, passenger-s side, or on the right side of the engine near the ignition coils.
The camshaft position sensor is located on the engine near the camshaft pulley.
This sensor is located at the front of the engine near the camshaft gear this is what I got 6 different locations manual covers 99-05

Oct 10, 2014 | Cars & Trucks

2 Answers

Where is the engine sensors location on a 1997 2.4 grand am?
Which sensors are you trying to locate? There are several.. Knock sensor, coolant temp sensor, oxygen sensor, mass air flow sensor, speed sensor, etc.. I can help with more detail :)

Oct 06, 2014 | 1997 Pontiac Grand Am

1 Answer

H2o bank 2 sensor 1 location
Bank and sensor location. Bank 1 refers to the back of cylinders that contain cylinder #1. Bank two refers to the other bank of cylinders that do not contain cylinder #1. Sensor 1 refers to the upstream O2 sensor or the O2 sensor before the catalytic convertor. Sensor 2 refers to the downstream O2 sensor or the sensor located after the Catalytic convertor. I hope that helps, let me know if you have any other questions, good luck.

Mar 25, 2014 | 2000 Cadillac DeVille

1 Answer

I need to know how many 02 sensors are on a 1997 dodge intrepid.
  • Up-stream sensor (located before catalytic converter)
  • Left up-stream sensor (located before catalytic converter)
  • Left down-stream sensor (located after catalytic converter)
  • Right up-stream sensor (located before catalytic converter)
  • Right down-stream sensor (located after catalytic converter)
4 sensors total.

Jul 29, 2010 | 1997 Dodge Intrepid

1 Answer

Location of cam sensor 2003 jeep grand cherokee v8
Answer
 pic_12.gif
 pic REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).

It is easier to remove/install sensor from under vehicle.

Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.


9347d80.gif

Jul 21, 2010 | 2003 Jeep Grand Cherokee

1 Answer

Where is the oxygen sensor on 1997 ford taurus wagon 3.0
Single or double overhead cam type engine? In any case, these are the locations listed below.
  • Up-stream sensor (located before catalytic converter)
  • Left up-stream sensor (located before catalytic converter)
  • Left down-stream sensor (located after catalytic converter)
  • Right up-stream sensor (located before catalytic converter)
  • Right down-stream sensor (located after catalytic converter)

May 04, 2010 | 1997 Ford Taurus

1 Answer

Location of IAT sensor in the car?
For Hyundai Car 1999-05 - Intake Air Temperature (IAT) Sensor Location (check several options):

1.- The IAT sensor is located against the firewall to the left side of the engine. It is combined with the Manifold Absolute Pressure (MAP) sensor.

2.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

3.- The IAT sensor is located in the air plenum assembly. On some vehicles it is combined with the MAF sensor.

4.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

5.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.

6.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.


In the next graphic, check the position 2...

caae1be.gif

FIG : Underhood sensor locations-Elantra 2004-2005 2.0L engine
Hope this help (remember comment and rated this) TY for using Fixya.

Apr 08, 2010 | 2004 Hyundai Elantra

3 Answers

Were on exaust is oxygen sensor in 1999 subaru impreza auto sport
On the SOHC engine the front (A/F) oxygen sensor is located in the front section of the front catalytic converter. The rear oxygen sensor is located in the rear section of the front catalytic converter. On the DOHC engine the front oxygen sensor is located in the front section of the exhaust system, just past the crossover pipe. The rear oxygen sensor is located in the front section of the catalytic converter.

Oxygen sensor location-Baja 2.5L SOHC engine
c3fce0b.jpg

Oxygen sensor location-Baja 2.5L DOHC engine
7aac75e.jpg


On the 2.0L engine the front (A/F) oxygen sensor is located in the front section of the exhaust system, just past the crossover pipe. The rear oxygen sensor is located in the front section of the rear catalytic converter. On the 2.2L engine the front (A/F) oxygen sensor is located in the front section of the front catalytic converter. The rear oxygen sensor is located in the rear section of the rear catalytic converter.

Oxygen sensor location-Impreza 1998-2001 2.2L engine
a5973e4.jpg


moz-screenshot.pngOxygen sensor location-Impreza 1998-2002 2.5L SOHC engine
3a84717.jpg
I hope helped with this; remember rated this help. Good luck.

Nov 20, 2009 | 1999 Subaru Impreza

1 Answer

Location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter

You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks

7acfed1.gif
d9eb1af.gif

Oct 20, 2009 | 2001 Ford Escape

3 Answers

Where is the bank 2 sensor 1 located.
Oxygen sensors are always numbered like this:

Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Most GM engines have #1 cylinder located on the left bank, (or Driver's Side) of the engine,

So, the answer to your question would be that you are looking for the sensor located before the catalytic converter on the right (or Passenger Side) of the truck.

Oct 17, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?

View Most Popular

2002 Lancer

  • Cars & Trucks

Related Question

Where is the camshaft position sensor located in a

  • Cars & Trucks

Open Questions:

0 Answers

hi,i dont know what is the head torque of my mitsubishi lancer 4g15 2002 model pleae help me thanks.

Jul 05, 2019 | 2002 Mitsubishi Lancer

0 Answers

can not locate heater circuit fuse in my 2002 lancer. under the hood or in the car? pls help

Aug 14, 2018 | 2002 Mitsubishi Lancer

0 Answers

I've lost my remote for 2002 lancer. When I open door with key, alarm goes,off. How do I stop it and use the car until I can get a replacement remote

Mar 26, 2017 | 2002 Mitsubishi Lancer

0 Answers

a/c blows hot air burning smell

Jun 29, 2014 | 2002 Mitsubishi Lancer

See all 2002 Mitsubishi Lancer Questions

Related Topics

2002 Mitsubishi Lancer Logo

8,544 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

2008 Mitsubishi Lancer GTS CVT...

2002 Mitsubishi Lancer

2002 Mitsubishi Lancer

2002 Mitsubishi Lancer

2002 Mitsubishi Lancer

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...