Lighting
Headlight Assembly
Removal & Installation
To Remove:
Open the hood.
Apply light pressure to the headlamp lens to hold the headlamp in place while disconnecting the retainers.
Lift up the retainers to release and remove the retainers.
Remove the headlamp mounting tabs from the slots in the upper fascia support and fender reinforcement.
Disconnect the wiring harness from the headlamp assembly.
Remove headlamp.
Remove the rubber access cover from the appropriate bulb to be replaced.
Rotate the headlamp bulb/socket counterclockwise to remove from the headlamp assembly.
To Install:
Connect the wiring harness to the headlamp.
Install the headlamp bulb/socket to the headlamp assembly rotating the socket clockwise until fully seated.
Install the rubber access cover.
Position the headlamp mounting tabs to the slots in the upper fascia and fender reinforcement.
Apply light pressure to the headlamp lens to hold the headlamp in place while installing the retainers.
Align the headlamp assembly retainers and slide them over the headlamp mounting tabs.
Close the hood.
Top of Form 1
Bottom of Form 1
thank you.
×