I replace the starter fuse (#23) and then turn the key and it blows. repeat, rinse, repeat. can't figure out why.
Mercedes service letter:
http://www.aev.com/uploads/file/SPRINTER%20NO%20CRANK%20NO%20START%20.pdf
Replace with 25 amp fuse.
My 56 plate sprinter wont start all electric working but wont turn as if there is no starter motor in it plz help.
You will need to buy a factory wiring diagram and track down all the wiring that the fuse supplies power to, you have a wire that is touching ground and that is a short.
SOURCE: 2006 sprinter blown 30 amp fuse , replaced motor
look around maybe you have a pinched wire somewhere between motor and the transmission.
SOURCE: 1999 Mercedes Benz CLK Old and New Key will not turn ignition
hi,seem your esl or electronic steering lock mechanism is defect,since you replaced with key,ty
SOURCE: ignition and steering wheel lock
Go to mercedesshop.com Then go to the forum and do a search for the solution.
Jason
SOURCE: starter enabler fuse blows which means the starter motor does not work until fuse is changed
It is possible that the starer is pulling too much amperage- 1st thing you need to do is find out what if any other consumers are on that circuit, 2nd you need to find out how much amperage is being consumed by the starter. 3rd test you wires most likely if a wire problem it is the heavy hot wire on the starter or the back of the alternator has a loose retaining nut
2,681 views
Usually answered in minutes!
×