Its the small lights at the bottom right of the headlight assembly
You have to remove the head light assy from the body,
on almost all vehicles today
Then you can somewhat easily remove the lamp
socket from it & then the lamp/bulb it'self
Have to look for screws or bolts holding it on
May have to remove a few things to get to the
bolts.
You could look on You Tube--- for Video of it
being done
SOURCE: How do I replace the headlight in my 2005 mitsubishi lancer
Hi. While looking into your question I came across another posting of the same question for a 2004 Mitsubishi Endeavor and I believe it could help you. I put it in a link below. The instruction are basically the same. I hope this helps. Let me know if I can be of anymore assistance.
2004 Mitsubishi Endeavor Headlight Replacement
SOURCE: Blinking a/c light on 2005 mitsubishi outlander
usually when the light is blinking you are either low on freon or have a controller problem
SOURCE: mitsubishi outlander cooling fans not operating
There is a Recall to replace your cooling fan module because of this concern.
Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.
Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.
If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.
SOURCE: RPM to low (700rpm) mitsubishi outlander 2.4L 2005
Your throttle body likely needs cleaning.
Take the intake hose off and using throttle body cleaner or brake cleaner, spray a rag and use our fingers to clean the gunk off the throttle plate and the contacting area of the inside of the throttle body.
SOURCE: how do you reset change oil light on mitsubishi outlander
Turn the key off.
Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.
Press and hold the "info" button until the maintenance screen begins flashing.
Release the "info" button and then push and hold it it for one second.
Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.
Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.
234 views
Usually answered in minutes!
×