I drive for long distances and need to know how to avoid clutch desk problems. and when to be replaced?
To reduce clutch disc/plate problems, avoid riding the clutch whilst driving, ie having ur foot on the clutch pedal when the engine is in operation, especially wqhen the vehicle is in motion. You see the clutch disc is sandwiched between the flywheel of the engine & the pressure plate. When the driver presses the clutch pedal, the sandwiching of the clutch plate is released, so therefore no drive is being transmitted from the engine to the road wheels. This gives an effect as if the vehicle is in neutral (engine can be revved, with no movement or propulsion of the vehicle). When the driver releases the clutch pedal, the clutch disc is now sandwiched tightly causing the drive to be transmitted to the road wheels which will now cause the vehicle to be propelled.
Clutch discs are only replaced when there are problemes with clutching in and changing gears. After constant pressing of the clutch, the asbestos material on the clutch disc after a period grinds down (clutch disc becomes thinner), which in turn will reduce friction characteristics when all the elements are sandwiched. This causes a slipping effect, preventing the drive from being transmitted to the road wheels efficiently. This causes other problems such as high fuel consumption, erratic engaging of gears, hard selecttion of gears, heavy vibration of the vehicle, stalling; just to name a few. In most cases an unusual smell of the clutch disc is observed.
Also just by resting ur foot on the clutch pedal while engine is running can be dmagaing too. You see the clutch release bearing rests on the pressure plate, so when the clutch pedal is pressed by the driver, there is a degree of friction being placed on the bearing because the pressure plate is always rotating with the engine. The clutch release bearing is stationery until the clutch pedal is pressed by the driver, which sends it into the moving pressure plate, so less pressing on the clutch pedal the less friction between the bearing and the pressure plate. Only operate/press/place foot on the clutch when necessary
515 views
Usually answered in minutes!
×