Start by drawing a diagram of the pulleys,and how the belt runs around them.(GM has sticker under the hood with a diagram,but I don't think anyone else does this).You need to find the tensioner,and use something to relieve the belt tension to allow belt removal.(some engines,especially on roomy rear wheel drive cars,may allow you to use an ordinary ratchet or a breaker bar to rotate the tensioner).
SOURCE: 1999 Mercury Cougar Serpentine belt
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: mercury sable 2002 serpentine belt change
There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.
SOURCE: how do i remove the serpentine belt on a 92
First, keep a copy of this diagram as you will need it when you go back to putting it on…
Here’s a link to a “how to” video that will walk you through removal and replacement of your serpentine belt.
SOURCE: how to replace starter +1993 Mercury Grand Marquis
disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,
735 views
Usually answered in minutes!
×