Swing gate hinge broke
SOURCE: How do I replace the interior LH door handle 97 Jeep Wrangler?
you will need a t-20 or t-15 torx bit driver to remove 2 screws holding the handle this is all that holds them on, on once you have a replacement handle it is easier to remove 2 lower screws on the door panel and unsnap the door panel to loosen it this will allow space making it easier to reinstall new handle just slide each end into the slot and reinsert 2 screws to not fully tighten until door panel is snapped back in. the panel is held on with clips and can be released using plastic pry tool around door panel edges.
SOURCE: On my 2002 Jeep Wrangler Sahara M/T My
Try taking the gauge cluster out and cleaning the connectors then apply some dielectric grease. this may help with the speedometer. to remove the gauge cluster, pop off the top vent cover (3 clips), then remove the knee guard under the steering wheel. After that you will see two screws holding down the bottom part of the gauge cluster and 2 more on the top. Hopes this helps!
49 views
Usually answered in minutes!
×