Reset maintance required light
I get many calls a week for this procedure...
This is really easy! Follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON, do not start the engine.
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
SOURCE: Maintance Required light on. How can I turn it off?
pull the instrument cluster and there will be a switch behind the cosmetic cover near the speedo.
SOURCE: HOW DO I RESET MAINTANCE REMINDER LIGHT
go to garage with computer for reseting engine mange
SOURCE: Reset code/sequence for Maintenance required
it ill get cleard when it gets checked . if u fixed the problem urself then go to autozone they can clear it or u can buy a tool to do so
SOURCE: the maintance requires yellow light is on. i got a
You could reset it by turning the ignition-key to 'ON'.
Then hold down the tripmeter knob until the
maintenance light goes off, that resets it.
617 views
Usually answered in minutes!
×