- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
clicking noise from front end while spinning tyres is an indication of failing cv joints. especially while turning the wheel from left to right. Suggest you replace the shafts
Most likely cause is a bad wheel bearing. Possibly a bad rotor, especially if you haven't serviced the brakes in a good while. If it's the wheel bearing, have both sides checked. It's a good time to replace both sides. Good luck.
Did you recently change your tires? An aggresive tread design, like a mud and snow tread, can create road noise that becomes more noticable at higher speeds. Bad wheel bearings can also produce a "roaring" sound, especially in front wheel drive cars. To check them, jack the front wheel up and spin the tire by hand. It won't spin smoth and even, there will be some resistance and you will hear grinding or crunching.
If your transmission was low enough on fluid, it could conceivably make noise. Also check your U joints or CV joints for play. any play in them will make noise although it is usually accompanied by a feeling of looseness or "jerking", especially when making changes in direction or speed.
There can be a lot of reasons for noise, but start by checking these things first. Hope this helps.
Rear differential fluid deterioration causes a moan/vibration noise when turning left or right. Try flushing the rear diff with honda dual pump fluid and see what happens. As far as the roaring sound on deceleration this could be in the Transmision or Transfer case. I would go to your local Honda dealer and have a qualified technician go on a test drive with you. Some noises can be difficult to diagnose.
THIS NOISE IS USUALLY THE HUB. HAVE SOMEONE GO WITH YOU ON A TEST DRIVE. GET THE ROARING TO HAPPEN AT ITS LOUDEST AND GENTLY SWERVE THE CAR LEFT AND RIGHT. DON'T BE SURPRISED IF YOU THINK BOTH HUBS ARE BAD.
LIFT THE FRONT OF THE CAR AND PUT IT ON JACK STANDS. PULL OUTWARD ON THE BOTTOM OF THE TIRE WHILE PUSHING INWARD ON THE TOP OF THE WHEEL. IF THE WHEEL MOVES EXCESSIVELY YOU FOUND THE HUB THAT IS NOISY.
USING A MECHANICS STETHOSCOPE YOU CAN SOMETIMES HEAR A ROARING TYPE NOISE ON THE BACKING PLATE SIDE OF THE HUB WITH THE ENGINE RUNNING AND THE TRANS IN GEAR. TRY NOT TO GET THE SPEED UP TOO FAR ESPECIALLY IF YOU CAN HEAR THE NOISE AT LOW SPEED, YOU DON'T WANT TO VIBRATE OFF THE STANDS.
×