TATA Truck torque & settings

Question edited for clarity.

In the link

https://www.google.com/search?q=Tata+Super+Ace+Ex2+Head+Torque+settings+Be-end+Torque+and+Main+Torque+settings

..

Question edited for clarity, 'year make model' first 3 words.
Question moved to model category.

Already answered on Fixya and also on Just Answer.

https://www.google.com/search?q=tata+indica+1.4+lsi+cylinder+head+torque+settings

..

The torque settings for the 4 cylinder engine on a Tata 709 EX Turbo will depend on the specific model and year of your vehicle, as well as the type of engine you have. Tata Motors provides specific torque specifications for each of their vehicles in their service manuals, which can be obtained from a Tata Motors dealership or service center.
Here are the general torque settings for a Tata 709 EX Turbo with a 4 cylinder engine:

• Cylinder head bolts: 80-85 Nm
• Connecting rod bolts: 55-60 Nm
• Main bearing bolts: 80-85 Nm
• Flywheel bolts: 65-70 Nm
• Oil pump bolts: 15-20 Nm
• Oil pan bolts: 10-15 Nm
• Oil cooler bolts: 10-15 Nm

Note: These torque settings are provided for reference only, and may not be applicable to your specific vehicle. Always refer to the service manual for your vehicle to obtain the correct torque settings. Improperly tightened bolts or fasteners can lead to engine damage or failure, so it is important to follow the torque specifications provided by the manufacturer.

Believe it or not, it is. But this is why it is so important to mark your caps and keep them on the corresponding rod in the correct direction. They cast the rod and machine the ID of the big end, then fracture the caps to separate them from the rod body. This leaves the rough mating surface, but it matches with the other side perfectly.

go buy a good service manual if you want to be a mechanic

https://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/torque3.pdf

Check this manual

On your Tata iindica LSi the main bearing torque is 60Nm, the big ends are 55Nm and the head bolts are torqued in three stages of 30Nm then 50Nm then finally 75Nm.

Go to ask.com.or go to fel pro head torque

i need the head talk settings & valve clearance for tata indica lxi