Radio code I have AUdi A3 but radio stuck on safe serial number is AUZ1Z3Y3277400 can you help or is more information required

NEED VIN AND NAVI SERIAL YES THEY ARE CORRECT.WITHOUT THOSE 2 IT IS IMPOSSIBLE FOR THEM TO GIVE U THE CODE.CHECK THE RADIO MANUAL FOR A STICKER AND SPECIALLY LOOK FOR A14 DIGIT NUMBER STARTING WITH AUZ....IF U CANT FIND IT U MUST TAKE OUT THE UNIT..IFU CAN SEND ME BOTH I WILL BE ABLE TO PROVIDE U WITH HE PIN.IF U NEED MORE INFO ON HOW TO TAKE OUT THE UNIT LET ME KNOW..

IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Audi A3 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready for use!

Radio must be pulled from dash and serial number noted. You'll need radio tools. These are two keys that insert in the side of the radio to unlatch the securing locks.

Available on eBay. Few dollar$

Possible if radio still original, dealer may give you code numbers. However, you may have to prove you are the owner.

Sometimes the radio code is written on a sticker in the trunk next to the spare wheel..

IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer! It's not enough to post the radios serial no for find the code, because it's an anti-theft code.

The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Hi

The radio is in safe mode and requires the security code to reactivate it. First check through your service documentation for a credit card sized card that Audi print the code on.

If this is missing the only other way to retrieve the code is

1) Remove the stereo from the dash and retrieve the serial number stamped on the back of the stereo.

2) Contact your Audi dealer with both the serial number and the chassis (VIN no) of your car. You will find the VIN no on your registration document.

3) If you do it this way and have retrieved both of these numbers yourself your Audi dealer will run the numbers and give you the code free of charge.

Hint: Some dealers will attempt to charge for this service but they are not authorized to so. On the original safe code card from Audi it specifically states that if you lose the code your Audi dealer will supply this free of charge. Please ensure to quote this information to the dealer if they attempt to make any service charge.

Hope this helps. Please do rate my answer and thanks for using FixYa.

try this site
www.radio-code.co.uk

It's usually printed in the owner manual. If you don't have the owner manual, you will need to go to a dealer and have them generate a code.

Either that, or join an Audi or VW forum on the Web and see if you can find a mechanic who will generate one for you using the dealer software.

TRY 4035

hold rbds and pscan till you see numbers then use the radio memory buttons to control the number you want to put in after the numbers are put in hold rbds pscan again till u see it says safe and radio works.

I accidentally tossed out my 1993 Audi 100CS radio code
when getting rid of junk in the glovebox.
After changing my headgasket on the motor we reconnected the battery supply & found the radio on SAFE mode.

AUZ1Z7N2020175 is the Radio #

Anyones help to me at [email protected] is appreciated.

Thank you in advance!