Power windows do not work

Number 21 is for the door lock fuse and relay, its a 10 amp fuse.
Number 7 is for the body control module, its a 10 amp fuse.

The fuse panel is under back seat.If all fuses checked out ok,then its faulty drivers door module called as DDM.

----------

For all types of power window problem and power windows not working,i suggest you to go through the help links given below.Click the link to go through its procedure to troubleshoot the problem :------

driver side power window problem?
http://technoanswers.blogspot.com/2011/06/driver-side-window-problem-on-mercury.html

-----------

Driver side power window wont go up?
http://howtobyme.blogspot.com/2011/10/driver-side-power-window-wont-go-up-on.html

---------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

rear door or window will not open ?
http://technoanswers.blogspot.com/2011/06/rear-door-or-window-will-not-open-on.html
--------------
How to remove door panel, door window motor and regulator ?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

--------

Power windows not working after car wash?

http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html

All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html

------------

How to replace power window motor in car?
http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html
----------
HOW TO REPLACE A POWER WINDOW SWITCH
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html
------------
How to Replace a Window Motor
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html
----------
HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html
---------
HOW TO REPLACE WINDOW RUN CHANNEL SEALS
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html
-------
HOW TO REPLACE A WINDOW REGULATOR
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html

-----------This will help.Thanks.

Change the battery in your wireless remote control. Check the fuses located underneath the drivers side steering wheel, flip the fuse box cover lid over and replace the power window and power door lock fuses. The back of the cover lid will have a diagram showing where each fuse is located, replace with the same number amp fuse. If your fuses are good and the battery inside your remote is new then you will need to replace the drivers side power window switch, click on the link below to view a replacement:

http://cgi.ebay.com/ebaymotors/05-06-Toyota-Tundra-OEM-Master-Power-Window-Switch-LKQ-_W0QQcmdZViewItemQQfitsZYearQ3a2006Q7cMakeQ3aToyotaQ7cModelQ3aTundraQQhashZitem20b3f6b69aQQitemZ140458243738QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

You may have blown the Power lock & window fuses when you replaced the master control window switch. Go to fuse box and check for blown fuses. Be sure to replace with same value of fuse.

With a small flat tip screwdriver, pry the master window switch up & with a test light check for power to the switch, if power is present & all windows not working, replace master switch. be sure window lock is not engaged.

Please check the fuse in the fuse box. Replace the burnt fuse with exactly the same value fuse.

Try replacing your window switch on the drivers front door.

replace the relay. for power windows for the power seat check fuse and relay.

If it does not work at all check the fuse first (check fuse and relay in any case).

If fuse is ok, test the wirings, from switch to fuse box, and from fuse box to motor.

If there is no power from switch to fusebox, replace switch.

If there is no power from switch to motor, check wirings and fuse, and eventually replace them.

If there is power to motor, check that the glass is not stuck , byu removing door panel, if the motor is not working replace it.

Regards.

Make sure it's not the switches, over the years I have replaced far more power window switches than I ever have fuses.
Try and remove the switches and then check with a multimeter or a simple bulb and two wires rigged up to see if you have power at the switches.