Engine Misfire diagnosis can be complex
and there are many reasons for misfires to occur. I suggest you read
the article at this link that deals with engine misfires and the
diagnosis of them and possible solutions to repair them.
SOURCE: cylinder 4 misfire on a 2000 crown victoria interceptor
first cylinder 4 is the last on the passenger side . first pull the coil out and check if there is water where the plug is. if there is take the water out and dry up the coil. if you find water you got a crack manifold or a bad intake manifold gasket. if there is no water replace the coil. good luck
SOURCE: 2000 crown vic police interceptor bypass a/c clutch pulley
you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,
SOURCE: 2005 Crown Vic Police Interceptor: Starts then stalls
Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.
SOURCE: Lay down backseat in Crown Vic Police Interceptor
The backseats of this vehicle do not fold down. They are placed on hooks and then they're bolted in on the bottom right and bottom left of the seat.
SOURCE: 1998 crown vic police. Had check engine light with
your egr on that side is dirty try cleaning it aslo check intake boltsaround those clyinders.
308 views
Usually answered in minutes!
×