Question about Cars & Trucks
Remove the two upper screws from the headlight housing, using a Phillips screwdriver.
Locate the two lower retaining nuts inside the engine compartment at the bottom of the headlight housing. Remove the nuts using a ratchet, extension and socket.
Posted on Nov 08, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Headlight lens removal
Open hood and look at top back of the assembly and you will see 2 clips. Pull them up and remove,then release the lower clip and pull assembly out.
Posted on Apr 08, 2009
This is easy. Lift the lid open. Look at the back of the sealed beam and you will see a clip and an o ring. Pull the clip up and pull wires back toward the driver's seat. Unscrew the o ring and firmly pull the bulb out toward the driver again. Note the 3 tabs on the bulb seat and realign the new bulb with those tab ( 2 bottom, 1 top). Replace with #9007 bulbs..do them both.
Posted on Dec 12, 2008
REMOVAL AND INSTALLATION
Posted on Sep 02, 2010
SOURCE: I cant figure out how
If you looke at the back side were it looks like the bolt in the should be a little tab sticking out at 90 degrees those a retainer clips pull up and the headlight should release.
Posted on Feb 11, 2011
Tips for a great answer:
Apr 29, 2017 | 1995 Ford Contour
Jul 26, 2014 | 1997 Ford F250 SuperCab
Feb 02, 2013 | 1995 Ford F250
Sep 02, 2010 | 1995 Ford F250
Mar 28, 2010 | 2002 Ford F250 Super Duty SuperCab
Mar 18, 2010 | 1993 Ford F250
Sep 24, 2009 | 1997 Ford F250 SuperCab
Jul 18, 2009 | 1995 Ford F250
544 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: