1995 GMC Jimmy Logo
Posted on Jan 07, 2009

I have a 1995 gmc jimmy 4x4 vortec engine and can not get it to 3

I have a 1995 gmc jimmy 4x4 vortec engine and can not get it to go in 3rd gear we hooked a computer up to it and it read no code we replaced 2 solinoids

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Jan 07, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jan 07, 2009
Answers
9
Questions
0
Helped
4388
Points
32

If it's a manual transmission, it's the bushings under the gear shift that a beat out of it. If it's an automatic, check you fluid level and filter. It may not be able to build enough pressure in the tranny if the filter is clogged or isn't enough fluid.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have 1999 GMC Jimmy. It had the 4.3 Vortec in it, would I be able to it out with 4.3 Vortec in a 1994 GMC Jimmy.

The engine will match up but the sensor plugs may not so you may have to swap the sensors between the engines.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

0helpful
1answer

I have a 1994 GMC Jimmy 4.3 vortec 4x4 automatic, and the transmission started to slip, then the battery died, we got it home and it wouldn't start, so we charged the battery and it ran fine for abou

You may potentially have an serious electrical drain in your car circuits. The drain is slow and continuous, draining your battery charge even if you do a start. Check the cabling and look for load on your battery with a Volt meter to check for any charge drainage. Check this as a precaution before replacing any more parts.
0helpful
1answer

1994 jimmy push button 4x4 wont engage

Could be the servo on the front diff not activating. Could be a power prob or failed unit.
0helpful
1answer

Remove starter 1995 Jimmy with vortec engine where is it located is it on the top of the engine on passenger side

It is under the motor, right where the transmission meets the engine, with two bolts going straight up into the block on the right side.
3helpful
1answer

Need firing order for 1995 4wd gmc jimmy v6 4.3 vortec

Hi there. I just did a tune up on my 95 Jimmy with the same motor. The firing order is 1-6-5-4-3-2 and the distributor rotation is clockwise. I hope this helps.
0helpful
1answer

Where is the throttle body on a 1995 gmc jimmy 4.3 vortec

that is the throttle valve, it opens to allow air in the engine to produce horsepower (along with fuel be injected), what are you trying to do here? Tell me your problem maybe I can help
1helpful
1answer

I have a 1995 gmc jimmy 4.3 vortec can any one tell me where the EGR VALVE is

Under hood, center, upper engine area, front of intake manifold, passenger side of water outlet, mounted in intake manifold
0helpful
1answer

Cannot locate thermostat on a 1995 GMC Jimmy 4.3 Vortec Engine? Need Photo if possible. Thanks

Follow top radiator hose to engine. Thermostst is under cover hose is connected to. If this is helpful, please post as such. If it is spotted, please post as fixya!! TY
0helpful
1answer
Not finding what you are looking for?

431 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...