I need to know how to remove the inside drivers door panel, i'm not sure how to take the window winder handle off. It is NOT electric.
There is a spring clip (kinda like a c-clip) underneath the crank handle, holding it fast to the stub shaft it sits on. There is a special hand tool made for window crank handle removal-a couple of dollars should buy one. But you can also use a rag to get the handle off. Slip the rag underneath the edge of the crank handle, get it between the handle and the door panel, and saw the rag back and forth under the handle. The rag will catch the ends of the c-clip and push them back so the handle can be removed. You may have to slip the rag around the handle till you catch the ends of the spring clip.
Testimonial: "thank you so much. "
SOURCE: I need to take off my innner door panel any help?
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: Australian Mitsubishi magna tr take off window handle
You need a small hook to get behind the base of the crank and remove the clip that retains the window crank.
968 views
Usually answered in minutes!
×