Highbeams always work, lowbeams work sometimes. fog lights work only when lowbeams work. I read it could be the headlight relays. Is this a possible DIY?
Low beam not working could be relay or bad contact at stork control. Fog lights should only work with park lights on. not supposed to be on with headlights like in the movies. This is illeagle in australia to have head lighs and fog lights on together as well as being dangerous to other motorists
SOURCE: My left headlight highbeam light works and the lowbeam don't why
the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.
SOURCE: Right side head light dose not work on lowbeam, bulb was replaced and still doesn't work.
THERE ARE FUSES THAT PROTECT THE HEADLIGHT CIRCUITS. CHECK TO SEE IF THE FUSES ARE GOOD. THIS SHOULD HELP YOU OUT REAL QUICK. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING AS WELL. PLEASE KEEP ME POSTED. GOOD LUCK
SOURCE: low beam light not working
Its your Lom! Lights out Module(if its an Eddie bauer) youtube it.
SOURCE: I have a 2005 Ford
AT FUSE TERMINAL #45 TO THE RIGHT OF THE HIGH BEAM RELAY AS YOU ARE LOOKING INTO THE ENGINE COMPARTMENT FROM THE FRONT OF THE VEHICLE. THERE IS A 15 AMP FUSE, PULL IT AND SEE IF IT IS BAD. IF IT IS REPLACE IT. THIS IS THE FUSE FOR THE HIGH BEAM RELAY.
664 views
Usually answered in minutes!
×