Tail lights just stoped working bulbs look fine
Replace the "looks fine" bulbs first (cheap fix), then replace the fuses (also cheap fix), if that doesn't fix the problem it could be wiring (may NOT be cheap fix!)....
:0)
SOURCE: 2001 Wrangler brake light not
The light assembly is grounded to the body through the mounting screws. It sounds as though it is a bad ground. You could run a ground wire to a bolt on the frame from a mounting screw to check for aground problem.
493 views
Usually answered in minutes!
Mar. 25 the dash lights went out after idling my car with the lights on for a moment (2-3 minutes while I knocked on a friend door two feet away from the front of the car, and talking with him for a minute) before turning the headlights off due to an odd dinging noise (Key in ignition dinging type noise).
Mar. 27 I got pulled over because I had no back lights, as the officer said "it's completely black back there." I didn't bother asking him if turn signals or brakes lights came on, but I'm assuming not. As far as I know, it's just the tail lights. I currently do not have the car as I left it at a friend's house.
Additional Note: The dinging for the headlights being on will not come on either.
my dont have tail lights my brake lights work but the parking lights dont work
is this a tail light issue or a brake light issue?
×