2006 Hyundai Tycson GL Headlight Problems

Check connector may be bent.

Check the bulbs could be blown low beam

try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Try flicking the mulit-function switch high beam on and off. There has been known problems with this switch, but mostly the first place to start is with some new light bulbs.
Or possibly your low beam filaments are burnt out. You have to replace the bulbs. Each bulb has a lowbeam and a high beam filament.

HEADLIGHTS NOT WORKING

It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.

==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----

All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

• Working of Headlight switch?
------------
• Both headlight bulbs blow together?

------------
• Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html

How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Instructions

1. • Turn the headlight switch on and inspect the headlights. Make sure to check both low- and high-beam lights, and then note the position of the bulb in the headlight assembly. Low-beams are in the top cavity of the assembly and high-beams are in the lower cavity.
   • 2Turn off the headlight switch and then remove the keys from the ignition.
     
   • 3
     
   • Open the hood and locate the seam to the headlight assembly and the side fender. Locate the headlight assembly release lever and push in on it slightly to unlock it and then pull it all the way up until it stops.
     
   • 4Place a blanket or pillow on the ground in front of the headlight assembly. Push the assembly outward from behind with one hand while being ready to catch the assembly with the other. The New Beetles use an adhesive sealant to protect the back of the headlights from exposure to moisture, so you'll have to give the assembly a push from behind.
     
   • 5Pull the wire harness plugs off from both the high- and low-beam blades of the respective bulbs.
     
   • 6Place the assembly on the blanket or pillow. Release the wire clip to the faulty headlight and then remove the headlight bulb.
     
   • 7Open the package of the new H1 bulb replacement without touching the glass portion of the bulb with your bare skin. Oils in human skin will damage the bulb. Handle it only by the metal base of the bulb insert.
     
   • 8Insert the new bulb in the appropriate headlight-assembly cavity and reattach the bulb retaining clip to lock the bulb in place.
     
   • 9Lift the assembly up and plug the wire harness plugs back into the respective blades of the bulbs.
     
   • 10Push the headlight assembly into its cavity, but before locking it in place, check the lights by turning on the headlight switch.
     

Removal & Installation To Remove:
WARNING
The halogen fog light bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope.
NOTE: The headlight bulb should not be removed from the headlight assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlight bulb performance. Contaminants may enter the headlight assembly where they can settle on the lens and reflector. Never turn on the headlights with the bulb removed.

1. Before servicing the vehicle, refer to the precautions in the beginning of this section. NOTE: Make sure that the headlight switch and the ignition switch are in the OFF position.
   
2. Remove the pin-type retainers, screws and the air deflector from the radiator.
3. Remove the three bolts and the headlight assembly.
4. Disconnect the electrical connector.
5. Remove the cover from the rear of the headlight assembly.
6. If equipped with HID, release the spring tabs to remove the low beam bulb, otherwise disconnect the electrical connector and remove the bulb.
7. Disconnect the electrical connector and remove the high beam bulb.

HID low beam headlight bulb

Standard low beam headlight bulb

High beam headlight bulb

To Install:

1. Place the headlight assembly in the proper position.
2. Install the cover from the rear of the headlight assembly.
3. Connect the electrical connector.
4. Install the three bolts and the headlight assembly.
5. Install the radiator air deflector.

Open the hood. Discount the neg. battery cable.Theres 3 screws right on top of the light assembly. Remove these screws to remove the headlight. To remove the bulb from the headlight assembly rotate the blub retaining ring counterclockwise. don't touch the new blub when installing. Make sure all 3 tabs go into there slots on the retaining ring when installing the new blub

The little parking light (also known as a city light) is in a plastic connector below the low beam lamp that simply slides out of the headlight assembly.

Grasp the plastic connector and pull back away from the headlight assembly and you will be able to unplug the light from the connector for replacement.

1. Remove headlight mounting bolts and nut
2. Remove assembly
3. Install headlight assembly (with new bulb)
4. Replace/tighten headlight mounting bolts and nut

1.