REAR BRAKE LIGHT DON'T WORK ON A TOYOTA CAMRY LE 2003 ALL THE REAR BULBS APPEAR TO BE GOOD
SOURCE: looking for a wiring diagram
I have the wiring diagrams for a1991 camry...It might be close enough
SOURCE: 1988 camry rear lights.
Look at the wiring harness that runs along the hinge on the trunk lid, driver side. Camrys with lights on the trunk lid are know to break one of these wires.
SOURCE: 2003 Toyota Camry - Both Brake lights not working
Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".
SOURCE: How to change a third brake light bulb for 1993 Toyota Camry?
open the trunk and look up along the top of the bumper and you should see two screws / nuts that secure the light assembly.
SOURCE: 1989 Toyota Camry. No brake lights.
It could be the relay, which is a yellow box located under the carpeting in the trunk on the left side. It is a problem common to your model. Also, check the brake switch's (behind the brake pedal) functionality (12V present with key at ACC or ON and continuity between wires when button engaged).
i hope this helps
-matthew
Testimonial: "Wow! I would have never found the problem without you guys. It was the relay located in the trunk. Thanks!"
1,339 views
Usually answered in minutes!
×