Cars & Trucks Logo

Related Topics:

Mark Posted on Dec 02, 2012

Does the engine management light come on if there is a problem with the gearbox Volkswagen transporter shuttle automatic

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Dec 03, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Dec 03, 2012
Answers
1
Questions
0
Helped
79
Points
1

No, gearbox and engine are different, try to rplace the sensor switch of the engine light indicator.

4 Related Answers

Anonymous

  • 183 Answers
  • Posted on May 19, 2008

SOURCE: 1985 honda shuttle

Dear customer,

1
if it welll welded than you ahve to remove also your gear box,
so try to buy with set in engine +gearbox,

2
yes you guess excatly its connected with bolted wheel with drive system,

3
yes its bolted,

4
Dear you have to choose the engine that recoonect your old gear box cause some model have some specifications that never matched up & having problem with this same you have,

so try to buy some similar engine which can easily connect to your gear box

5
or if you bought already a 1 new engine than you can connect this with special connector which can help you for gearbox connection this type of connector will be availalble at auto R&D centers they have for experiments,

IF you request than they will definatly helps you,

TRy & having funn with new engine

THNX


Ad

Anonymous

  • 128 Answers
  • Posted on Nov 19, 2008

SOURCE: Fault in Automatic Gearbox and Check Engine Light

If the transmission is still operating ok, you can drive it, but you need to get it checked, since a fault has been detected by the transmission computer.

Bret
RepairPal.com

Anonymous

  • 580 Answers
  • Posted on Jul 12, 2009

SOURCE: 2001 Volkswagen Transporter Owners Manual

I found a link that may help it is for a shop manual it includes the long wheel base and TDI models 1.9, 2.4, & 2.5 cost is $35.95 US
http://www.books4cars.com/result3.asp?finddesc=transporter+&imageField2.x=16&imageField2.y=16
You will probably find it cheaper on Ebay there are several listed there NOW
Sorry I could find nothing listed for OWNERS manual you should try a salvage or breakers yard for that
Hope this helps

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on May 19, 2012

SOURCE: engine management light on suspect gearbox fluid low, don't know where to fill up

chances are it no filler or dipstick making it a dealer only special tools type job

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1998 volkswagen transporter 3 & 4 automatic gear not shifting

try a service first
should have solenoids that can be replaced during a service if faulty

the transmission also will have a electronic module to be checked for fault codes
0helpful
1answer

I drive a vw transporter if there was a problem wit the gearbox would the engine management light come on or not

No. If there is a transmission problem the check engine light will NOT come on. The TCU (transmission control module) will log a fault if there is a transmission problem. (Will not show on dash, only scan tool)
9helpful
1answer

How do I check the transmition oil level on jetta 2004?

2004 Volkswagen Jetta

THE 5 SPEED AUTOMATIC TRANSMISSION

At the bottom of the automatic gearbox (tiptronic) you will find one threaded plug on below surface, (follow red arrow in the picture below). This is for emptying.

tdisline_432.jpg



The oil level threaded plug is placed on the car front lateral automatic gearbox surface, (follow yellow arrow in the picture below).

tdisline_433.jpg

The filling oil plug is placed on the upper automatic gearbox surface, (follow green arrow in the picture below).

tdisline_434.jpg
Automatic Transmission Fluid (ATF) checking:
1. Requirements for check:
1.1. Vehicle standing on level surface.
1.2. Transmission must not be in fail-safe mode.
1.3. Shift lever in "P" position, parking brake applied.
1.4. Engine idling.
1.5. Air Conditioner and heater OFF.
1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test.
1.7. Automatic gearbox oil capacity: 2,5 liter. Only ATF with VW designation may be used. Do not use any lubricant additives.
1.8. Automatic Transmission Fluid ATF - part number: VW G 052 990 A2
1.9. An ATF level check when transmission oil temperature is too low results in overfilling, when too high results in underfilling.
2. CAUTION: Too much or too little ATF will affect the operation of the transmission. The ATF level must be checked at regular intervals.


Don't forget to rate my response. Thanks!

2helpful
1answer

Transmission shifting shifts only at high rpm

2001 Volkswagen Jetta TDI

THE 5 SPEED AUTOMATIC TRANSMISSION

At the bottom of the automatic gearbox (tiptronic) you will find one threaded plug on below surface, (follow red arrow in the picture below). This is for emptying.

tdisline_432.jpg



The oil level threaded plug is placed on the car front lateral automatic gearbox surface, (follow yellow arrow in the picture below).

tdisline_433.jpg

The filling oil plug is placed on the upper automatic gearbox surface, (follow green arrow in the picture below).

tdisline_434.jpg
Automatic Transmission Fluid (ATF) checking:
1. Requirements for check:
1.1. Vehicle standing on level surface.
1.2. Transmission must not be in fail-safe mode.
1.3. Shift lever in "P" position, parking brake applied.
1.4. Engine idling.
1.5. Air Conditioner and heater OFF.
1.6. ATF temperature must not exceed 104 Fahrenheit degree (40 Celsius degree) at start of test.
1.7. Automatic gearbox oil capacity: 2,5 liter. Only ATF with VW designation may be used. Do not use any lubricant additives.
1.8. Automatic Transmission Fluid ATF - part number: VW G 052 990 A2
1.9. An ATF level check when transmission oil temperature is too low results in overfilling, when too high results in underfilling.
2. CAUTION: Too much or too little ATF will affect the operation of the transmission. The ATF level must be checked at regular intervals.


Don't forget to rate my response. Thanks!

12helpful
4answers

Engine code PO732

P0732 means problem in yours automatic transmition gearbox. Gear 2 incorect ratio.The problem can be as follow: TR sensor/solenoid switch or shift solenoid . Can be also mechanical problem.
2helpful
1answer
2helpful
1answer

T5 vw transporter shuttle gears wont engage to drive vehicle

try checking your gear linkages make sure it is actually engaging in the box before you go any further
0helpful
1answer

1985 honda shuttle

Dear customer,

1
if it welll welded than you ahve to remove also your gear box,
so try to buy with set in engine +gearbox,

2
yes you guess excatly its connected with bolted wheel with drive system,

3
yes its bolted,

4
Dear you have to choose the engine that recoonect your old gear box cause some model have some specifications that never matched up & having problem with this same you have,

so try to buy some similar engine which can easily connect to your gear box

5
or if you bought already a 1 new engine than you can connect this with special connector which can help you for gearbox connection this type of connector will be availalble at auto R&D centers they have for experiments,

IF you request than they will definatly helps you,

TRy & having funn with new engine

THNX


Not finding what you are looking for?

89 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...