My right side headlight had started flickering and my husband has replace the bulb, check the fuse, check the wires and replaced it. My light will not work at all. I have no highbeams either. My only light working is left side. If I turn on highbeams I have no lights. He has also checked the turn signals and they work fine. Please help!!! K
It
can be faulty headlight switch or issue with its wiring. Or its faulty head
light fuse. ========== To
troubleshoot the issue i suggest you help link with appropriate solution.
So you can follow the test and confirm what exact problem is there in your case
of headlights not working:----- http://alltypesofpartsreplacing.blogspot.com/2012/12/headlights-not-working-high-beams-not.html ---------- These will help. Thanks.
Click the link below: -----
Headlight and high beam lights troubleshooting?
Well the turn signals are a different circuit.
Usually the common problem with one headlight is the ground circuit.
Both the high and low beam use the same ground. I would check for power for each circuit and a good ground at the light socket.
SOURCE: Headlights and turn signal lights not working
I would check for a possible defective multi-function switch. (Turn signal switch)
SOURCE: No left turn signal or brake light on trailer
I had the same problem on 06 ram, the problem is one of the controll modules under the fuse panel under the hood on the drivers side. My trailer mechanic told me this was a common problem and dodge will only charge about 700 dollars to replace it. he solved my problem by installing a converter on the wires to the tail lights of the truck then running down to the trailer plug. it was most likely caused by a short in the trailer and dodge in their infinate wisdom failed to put a fuse between the trailer and control module. and by the way even though this is a manufacturing defect they will not warranty the module. hope this helps.
SOURCE: I have a 2006 dodge
Hello Durant.
Your rear signal lamps are turned on by the body control module (BCM).
You could have some broken wires from the BCM to the rear signals or the BCM isn't providing power to them. The BCM must be getting a signal input because the front ones are functional.
If you want to trace the wires here are the colors you are looking for.
Left rear wire is white/dark green.
Right rear wire is white/brown.
You may need to have your BCM scanned to verify.
If you would like more information to solve this yourself ask me.
Testimonial: "If I gave you 2 thumbs out, I do not know how. I am not used to this system. You need as many thumbs up are available. I do not know how to do that."
SOURCE: durango trailer wiring left turn signal doesn't
I lost all of my trailer lights. Turns out the wires in the harness were corroded out by the gas tank. Dealer said it was a common problem
2,132 views
Usually answered in minutes!
×