I would like to be able to identify parts of the ignition circuit which warrant the application of ferrites to get rid of RFI on my 2 way shortwave radio. Problem is page 66 of the vehicle circuit manual is missing from highlanderclub.re and this is the start of the pages with ignition circuits. Any idea where I might get these pages?
Regards
James
SOURCE: Can you please help? my 1990 Celsior LS400. The 4
may be a leak in one or all fo the air bags. or in the air supply line.there is an on/off switch in the trunk on the left side in the tool compartment. make sure it is on. when you lift the car(changing tires, etc.) switch it off.
Turn ignition to "ACC" and press the odometer button until the display reads actual mileage (not Trip A or B).
Turn ignition off.
Hold the same button down that you used in step 1.
While holding the button, turn ignition to 'ON'.
The 'Maint Reqd' light should blink and go out.
Done!
82 views
Usually answered in minutes!
×