Usually is explained in the instructions with the transponder key.
If you need further help, reach me via phone at https://www.6ya.com/expert/gary_9c859f4aa7e5ab10
SOURCE: NEED 1999 WINDSTAR TRANS. KEY SENSOR LOCATION
it is located on the column around the key cylinder it is a black ring with connector
SOURCE: 2001 Ford Expedition: inexpensive new ignition (transponder) key?
the old keys or another expedition key can be reprogrammed to your vehicle, the only thing is you would have to change the lock cylinder to match the key or swap the ignition from another expedition with that has the key
SOURCE: need to program a new transponder key with 2 working keys
insert one key and turn on quickly insert second key and turn on then off and same for the third new key if the third programmed correctly the theft light should be on steady not blinking
SOURCE: how do you test the transponder for an ignition switch
will the key go all the way in the cylinder? the transponder is the black ring thats around the cylinder, has a connector... kinda hard to explain-
SOURCE: 1999 Ford Taurus with only 1 key
a good locksmith cant program the key. this is a dealer item. hope this helps.
132 views
Usually answered in minutes!
Ford said they dont keep the codes past a certain year so i have to go to a locksmith, now if i buy ACDelco - Switch Ignition & Start Part # F1496A and put that in or take an ignition out of another same year explorer at the junk yard can they just reprogram the new keys i have to match the vehicle?
×